Raspberry Pi Ups
Les 10 meilleurs produits en juin 2025
Dernière mise à jour :
8 juin 2025
Waveshare
Waveshare Uninterruptible Power Supply UPS Module Supports Charging and Power Output at The Same Time 3S & 5V 5A Output
Livraison gratuite
99
QUALITÉ MAXIMALE
VOIR SUR AMAZON
Amazon.fr
#1 GAGNANT
▼ Montrer plus
▲ Montrer moins
Onboard 5V regulator, up to 5A continuous output current, more sufficient power source for Raspberry Pi and Jetson Nano. Uninterruptible power supply module 3S.
Supports charging and power output at the same time, 3S * & 5V 5A output. If external power supply is unavailable, keeps the system running without any trouble.
Adapting various interfaces via cables, easy to integrate into mobile robots or industrial control equipment.I2C bus communication, monitoring the batteries voltage, current, power in real time.
Battery warning indicators,easy to check if the battery is connected correctly.(Warning:DO NOT connect the charger if the indicator lighted up,otherwise the protection circuit would be broken down).
Real time monitoring,monitoring the batteries voltage, current and power via I2C.Safe and stable circuit design.Multi battery protection circuits:protection circuits for over charge/discharge, over current, short circuit, and reverse.Along with the equalizing charge feature, more safe and stable.
36,99 € SUR AMAZON
Geekworm
Geekworm Raspberry Pi 5 UPS (X1202), 4-Cell 18650 UPS (Max 5.1V 5A Output) with Wide 6-18V Input | Auto Power on | Safe Shutdown | Power Loss Detection
Livraison gratuite
97
QUALITÉ SUPÉRIEURE
VOIR SUR AMAZON
Amazon.fr
#2
▼ Montrer plus
▲ Montrer moins
【Compatibility】 for Raspberry Pi 5 8GB / 4GB / 2GB / 1GB
【Function】X1202 provides max 5.1V 5000mA Power Backup, intelligent and safe power management like auto power on, safe shutdown, full power-off from software, power loss and power adapter failure detection, on-board power button to power on/off
【Versatile Design】X1202 is designed to be attached on bottom, enabling easy stacking with other Raspberry Pi accessory boards for enhanced applications.
【How to Power】Power via DC 5521 power jack of X1202: 6-18Vdc , ≥3A (Recommend 12V 5A 60W PSU ASIN: B0BD81W6SN); OR power via USB-C port of X1202: 5Vdc 5A via USB Type-C (Recommended 5V 5A USB-C power adapter ASIN: B0CP8SRXSC)
【18650 Battery Reuirement】Battery length max 65.3mm, diameter max 18.5mm. NOTE: NOT include batteries!
【Packing List】 X1202 Expansion Board x 1, Screws Pack x 1 (Not include raspberry pi 5 motherboard, batteries or power adapter)
【Matching Case(NOT included)】Refer to X1202-C1 (ASIN: B0D4ZBXGSH)
60,89 € SUR AMAZON
Waveshare
Waveshare UPS Hat (B) for Raspberry Pi 5/4B/3B+ 5V Uninterruptible Power Supply 5A High Current with Pogo Pins Connector
Livraison gratuite
96
QUALITÉ SUPÉRIEURE
VOIR SUR AMAZON
Amazon.fr
#3
▼ Montrer plus
▲ Montrer moins
Designed for Raspberry Pi series, compatible with Raspberry Pi 5 / Raspberry Pi 4B / Raspberry Pi 3B+ , etc.
I2C bus communication, monitoring the batteries voltage, current, power, and remaining capacity in real time
Multi battery protection circuits: over charge/discharge protection, over current protection, short circuit protection, and reverse protection, along with the equalizing charge feature, more safe and stable
Onboard 5V regulator, up to 5A continuous output current, more sufficient power source for Raspberry Pi
5V USB output, convenient for powering other boards Batteries warning indicators, easy to check if the battery is connected correctly
31,99 € SUR AMAZON
GeeekPi
GeeekPi Raspberry Pi UPS V5 Alimentation UPS Hat, Prise en Charge 18650 Chargeur de Batterie Power Bank Carte d'extension de Gestion de l'alimentation 5 V pour Raspberry Pi 4B/3B+/3B/2B/B+/B/A+/A
Livraison gratuite
90
QUALITÉ DISTINGUÉE
VOIR SUR AMAZON
Amazon.fr
#4
▼ Montrer plus
▲ Montrer moins
UPS Plus est une nouvelle génération de module de gestion de l'alimentation UPS qui prend en charge la mise à niveau du micrologiciel OTA et prend en charge le RTC intégré.
Il y a deux puces INA219 à bord pour détecter la tension des batteries et la tension de sortie d'UPS Plus vers Raspberry Pi.
Compatible avec Raspberry Pi 4B/3B+/3B/2B/B+/B/A+/A
Contenu de l'emballage : 1 onduleur Plus pour Raspberry Pi, 4 piliers en cuivre M2.5, 4 vis M2.5, 4 bâtons longs en cuivre M2.5, 4 écrous M2.5, 1 bouclier en acrylique, 1 mode d'emploi.
Comment utiliser, veuillez vous référer à wiki.52pi.com/index.php?title=EP-0136
45,99 € SUR AMAZON
Waveshare
Waveshare UPS Hat (E) for Raspberry Pi 5/4B/3B+, Supports 4× 21700 Li Batteries (Not Included), Bi-Directional Fast Charging, 5V 6A Output, Pogo Pins Connector
Livraison gratuite
87
QUALITÉ FIABLE
VOIR SUR AMAZON
Amazon.fr
#5
▼ Montrer plus
▲ Montrer moins
The UPS HAT (E) is an uninterruptible power supply (UPS) expansion board specially designed for Raspberry Pi series. Onboard battery fuel gauge IC, fast charging chip and high-power buck chip to realize higher power input and output. Supports monitoring the operating state of the HAT via the I2C interface.
Adopts pogo pins connector design, compatible with Raspberry Pi 5 / 4B / 3B+. Supports displaying battery level on the system, easy to check the operating state of the HAT
Onboard Type-C port with bi-directional fast charging, supports multiple charging input / output protocols such as PD3.0, up to 40W charging power. Onboard high-power buck chip for stable 5V 6A power output
Onboard battery fuel gauge IC for reading battery voltage, current, power, remaining capacity and other parameters. Onboard MCU management, supports detecting power connection and booting the Pi
Supports I2C bus communication for monitoring the operating status of Type-C port and batteries in real time. Supports 4× 21700 Li batteries (NOT included), larger capacity and longer battery life. Can provide with online development resources and manual
44,99 € SUR AMAZON
Geekworm
Geekworm X1200 5V UPS Shield for Raspberry Pi 5, with Max 5.1V 5A Output & Auto Power on & Safe Shutdown & Power Loss Detection Function
Livraison gratuite
82
QUALITÉ FIABLE
VOIR SUR AMAZON
Amazon.fr
#6
▼ Montrer plus
▲ Montrer moins
【Compatibility】 for Raspberry Pi 5 8GB / 4GB / 2GB / 1GB
【Function】X1200 provides max 5.1V 5000mA Power Backup, intelligent and safe power management like auto power on, safe shutdown, power loss and power adapter failure detection, on-board power button to power on/off
【Versatile Design】X1200 is designed to be attached on bottom and don't use the 40-pin header, enabling easy stacking with other Raspberry Pi accessory boards. This versatility allows you to expand the functionality of your Raspberry Pi and create enhanced applications tailored to your specific needs
【How to Power】Power via X1200 USB-C port: 5Vdc 5A via USB Type-C; (Recommended power adapter ASIN: B0CP8SRXSC)
【18650 Battery Reuirement】Battery length max 65.3mm, diameter max 18.5mm. NOTE: NOT include batteries!
【Packing List】 X1200 Expansion Board x 1, Screws Pack x 1 (Not include raspberry pi 5 motherboard, batteries or power adapter)
【Matching Case (NOT included)】Refer to X1200-C1 Case (ASIN: B0D4Z7NDNP)
55,89 € SUR AMAZON
Geekworm
Geekworm Raspberry Pi 4 UPS X703, Ultra-Compact 18650 UPS Shield with Auto Power on for Raspberry Pi 4 8GB/4GB/2GB Only
Livraison gratuite
78
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#7
▼ Montrer plus
▲ Montrer moins
【Compatibility】UPS with auto power on and Max 5.1V 4A output for Raspberry Pi 4 Model B 8GB/4GB/2GB, can also stack with other Raspberry Pi accessory boards or 3.5 inch screen for enhanced applications. NOT support Raspberry Pi 3
【3A Fast Charging】Supports 3A fast charging via USB-C socket, add 4 test pins to achieve powered between X703 and Raspberry Pi 4 without additional cable
【Working time】Work with single 18650 Lithium Ion battery with up to 4 hours working time, integrated over current protection, over voltage protection and battery reverse connection protection
【Multiple Onboard Interfaces】Allows power input via Type-C socket or XH2.54 connector; On-board PH2.0 connector allows to connect external power switch
【How to power】5Vdc +/-5% , ≥3A (Via Type-C Port of X703), Recommend 5V 4A 20W power supply (ASIN: B09J4V3RYK)
【Note】DON'T supports software safe shutdown.
【Jumper Cap Description】√① If [CHG] pin is OPEN, battery charging will be started after powering on(short press the on-board button to turn on) and stopped after powering off(press and hold for 2-3 seconds to turn off). If [CHG] pin is SHORT, the battery will be automatically charged once your power adapter connected. The purpose of adding the [CHG] jumper is to extend the life cycle of the battery by reducing the number of recharges. √② If [PON] pin is SHORT, power always on, power button disabled; If [PON] pin is OPEN, press power button to turn on, and hold 3s to turn off.
29,89 € SUR AMAZON
Geekworm
Geekworm X306 V1.3 Ultra-Thin UPS Shield for Raspberry Pi Zero 2 W
Livraison gratuite
78
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#8
▼ Montrer plus
▲ Montrer moins
【Update】Updated to V1.3 in July 2024. 1. Only compatible with Raspberry Pi Zero 2W；2. Removed 3 standard USB-A 2.0 ports；3. Removed 4-pin header for external power switch and always-on power option; 4. Smaller size, simplified use
【Compatibility】Compatible with Raspberry Pi Zero 2 W ONLY
【Ultra-thin UPS】Ideal uninterruptible power supply (USP) solution for Raspberry Pi Zero W/2 W, max. 5.1 V, 4000 mA power backup with single cell battery holder
【How to Power】Power via USB-C 5V Power In port of X306; 5Vdc +/-5% , ≥3A; Recommended Geekworm 5V 4A 20W USB-C power supply(ASIN: B09J4V3RYK)
【How to cool】Recommended for use with C296 aluminium heat sink (ASIN: B09QMBCXLB) for Raspberry Pi Zero 2 W.
【Packing List】1 x X306 Expansion Board; 4 x M2.5x5mm Screws; Note: not inlcude Raspberry Pi board, battery, GPIO Header & power adapter.
29,89 € SUR AMAZON
GeeekPi
GeeekPi Raspberry Pi Pico/Pico W UPS Power Supply Uninterruptible UPS Hat, Power Bank Power Management Expansion Board for Raspberry Pi Pico/Pico W
Livraison gratuite
74
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#9
▼ Montrer plus
▲ Montrer moins
Il s'agit d'une alimentation portable pour le Raspberry Pi Pico;Plug & Play
Ne prend en charge que la batterie au lithium 18650
La puissance restante de la batterie peut être lue à partir des 4 indicateurs LED. Vous pouvez également lire les informations de tension et de courant de la batterie en connectant le câble USB à TTL aux broches du port série de l'onduleur.
L'invite de charge pendant la charge est très intuitive, et lorsque la batterie est complètement chargée, elle s'arrête de charger et l'indicateur de veille sur le panneau s'allume.
Tous les GPIO sont en tête et fournissent des sérigraphies claires qui sont très pratiques pour les expériences Pico.
Contenu de l'emballage : 1x UPS pour Raspberry Pi Pico
12,99 € SUR AMAZON
Waveshare
Waveshare UPS Hat (C) for Raspberry Pi Zero 5V Uninterruptible Power Supply Multi Battery Protection Circuits(Battery is Not Included)
Livraison gratuite
64
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#10
▼ Montrer plus
▲ Montrer moins
Power Your Pi Zero Seamlessly From Power Connection OR The Backup Batteries. Supports Recharging And Regulated 5V Output At The Same Time, I2C Monitoring.
Onboard spring pogo pins for connecting with Raspberry Pi Zero series boards. Li-po battery recharge chip, with dynamic path management, more stable power supply.
Voltage boost chip, providing regulated 5V power output. I2C bus communication, monitoring the battery voltage, current, power, and remaining capacity in real time.
Multi battery protection circuits: over charge/discharge protection, over current protection, and short circuit protection, more safe and stable.
Recharging indicator for monitoring the battery operating status.
28,99 € SUR AMAZON
ups raspberry pi
raspberry pi 4 ups
raspberry pi ups hat
ups hat raspberry pi
ups raspberry pi 4
raspberry pi 5 ups
ups raspberry pi 5
raspberry pi 3 ups
pi raspberry
raspberry pi
#1 GAGNANT
