Raspberry Pi Ups Hat
Les 10 meilleurs produits en septembre 2025
Dernière mise à jour :
11 septembre 2025
Waveshare
Waveshare UPS Hat (E) for Raspberry Pi 5/4B/3B+, Supports 4× 21700 Li Batt (Not Included), Bi-Directional Fast Charging, 5V 6A Output, Pogo Pins Connector
Livraison gratuite
98
QUALITÉ MAXIMALE
VOIR SUR AMAZON
Amazon.fr
#1 GAGNANT
▼ Montrer plus
▲ Montrer moins
The UPS HAT (E) is an uninterruptible power supply (UPS) expansion board specially designed for Raspberry Pi series. Onboard batt fuel gauge IC, fast charging chip and high-power buck chip to realize higher power input and output. Supports monitoring the operating state of the HAT via the I2C interface.
Adopts pogo pins connector design, compatible with Raspberry Pi 5 / 4B / 3B+. Supports displaying batt level on the system, easy to check the operating state of the HAT
Onboard Type-C port with bi-directional fast charging, supports multiple charging input / output protocols such as PD3.0, up to 40W charging power. Onboard high-power buck chip for stable 5V 6A power output
Onboard batt fuel gauge IC for reading batt voltage, current, power, remaining capacity and other parameters. Onboard MCU management, supports detecting power connection and booting the Pi
Supports I2C bus communication for monitoring the operating status of Type-C port and batt in real time. Supports 4× 21700 Li batt (NOT included), larger capacity and longer batt life. Can provide with online development resources and manual
44,99 € SUR AMAZON
Coolwell
UPS Hat (C) for Raspberry Pi Zero Series, Stable 5V Uninterruptible Power Supply, Multi Battery Protection Circuits Real Time Monitoring
Livraison gratuite
98
QUALITÉ MAXIMALE
VOIR SUR AMAZON
Amazon.fr
#2
▼ Montrer plus
▲ Montrer moins
Broches Pogo à ressort intégrées pour connecter les cartes Raspberry Pi Zero Series
Puce de recharge de batterie Li-po, avec gestion dynamique du chemin, alimentation plus stable ; puce de surtension pour une puissance de sortie régulée de 5 V
Communication bus I2C, surveillance de la tension de la batterie, du courant, de l'alimentation et de la capacité restante en temps réel ; indicateur de charge pour surveiller l'état de fonctionnement de la batterie
Circuits de protection de batterie multiples : protection contre les surcharges/décharges, protection contre les surintensités et les courts-circuits, plus sûr et stable
33,18 € SUR AMAZON
Waveshare
Waveshare UPS Hat (B) for Raspberry Pi 5V Uninterruptible Power Supply 5A High Current with Pogo Pins Connector
Livraison gratuite
95
QUALITÉ EXCELLENTE
VOIR SUR AMAZON
Amazon.fr
#3
▼ Montrer plus
▲ Montrer moins
Designed for Raspberry Pi series, compatible with Raspberry Pi 3 / 3B+ / 4B, etc.
I2C bus communication, monitoring the batt voltage, current, power, and remaining capacity in real time
Multi batt protection circuits: over charge/discharge protection, over current protection, short circuit protection, and reverse protection, along with the equalizing charge feature, more safe and stable
Onboard 5V regulator, up to 5A continuous output current, more sufficient power source for Raspberry Pi
5V USB output, convenient for powering other boards batt warning indicators, easy to check if the batt is connected correctly
31,99 € SUR AMAZON
GeeekPi
GeeekPi Raspberry Pi UPS V5 Alimentation UPS Hat, Prise en Charge 18650 Chargeur de Batterie Power Bank Carte d'extension de Gestion de l'alimentation 5 V pour Raspberry Pi 4B/3B+/3B/2B/B+/B/A+/A
Livraison gratuite
91
QUALITÉ DISTINGUÉE
VOIR SUR AMAZON
Amazon.fr
#4
▼ Montrer plus
▲ Montrer moins
UPS Plus est une nouvelle génération de module de gestion de l'alimentation UPS qui prend en charge la mise à niveau du micrologiciel OTA et prend en charge le RTC intégré.
Il y a deux puces INA219 à bord pour détecter la tension des batteries et la tension de sortie d'UPS Plus vers Raspberry Pi.
Compatible avec Raspberry Pi 4B/3B+/3B/2B/B+/B/A+/A
Contenu de l'emballage : 1 onduleur Plus pour Raspberry Pi, 4 piliers en cuivre M2.5, 4 vis M2.5, 4 bâtons longs en cuivre M2.5, 4 écrous M2.5, 1 bouclier en acrylique, 1 mode d'emploi.
Comment utiliser, veuillez vous référer à wiki.52pi.com/index.php?title=EP-0136
45,99 € SUR AMAZON
Waveshare
Waveshare UPS Hat (C) for Raspberry Pi Zero 5V Uninterruptible Power Supply Multi Batt Protection Circuits(Batt is Not Included)
Livraison gratuite
82
QUALITÉ FIABLE
VOIR SUR AMAZON
Amazon.fr
#5
▼ Montrer plus
▲ Montrer moins
Power Your Pi Zero Seamlessly From Power Connection OR The Backup batt. Supports Recharging And Regulated 5V Output At The Same Time, I2C Monitoring.
Onboard spring pogo pins for connecting with Raspberry Pi Zero series boards. Li-po batt recharge chip, with dynamic path management, more stable power supply.
Voltage boost chip, providing regulated 5V power output. I2C bus communication, monitoring the batt voltage, current, power, and remaining capacity in real time.
Multi batt protection circuits: over charge/discharge protection, over current protection, and short circuit protection, more safe and stable.
Recharging indicator for monitoring the batt operating status.
28,99 € SUR AMAZON
Waveshare
Waveshare UPS Hat Compatible with Raspberry Pi 5V Uninterruptible Power Supply Multi Batt Protection Circuits Charge and Power Output at The Same Time
Livraison gratuite
80
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#6
▼ Montrer plus
▲ Montrer moins
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards. Comes with development resources and manual.
I2C bus communication, monitoring the batt voltage, current, power, and remaining capacity in real time. When the voltage dips too low, it is possible to save files properly and then shutdown the system by software, to avoid any data loss.
Multi batt protection circuits: over charge/discharge protection, over current protection, short circuit protection, and reverse protection, along with the equalizing charge feature, more safe and stable.
Onboard 5V regulator, up to 2.5A continuous output current 5V USB output, convenient for powering other boards. batt warning indicators, easy to check if the batt is connected correctly.
It is able to charge the batt and provide power output at the same time from external power supply. Automatically switch over to batt output if external power supply is unavailable, keeps the system running without any trouble.
35,99 € SUR AMAZON
Geekworm
Geekworm Raspberry Pi 4 UPS X703, Ultra-Compact 18650 UPS Shield with Auto Power on for Raspberry Pi 4 8GB/4GB/2GB Only
Livraison gratuite
79
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#7
▼ Montrer plus
▲ Montrer moins
【Compatibility】UPS with auto power on and Max 5.1V 4A output for Raspberry Pi 4 Model B 8GB/4GB/2GB, can also stack with other Raspberry Pi accessory boards or 3.5 inch screen for enhanced applications. NOT support Raspberry Pi 3
【3A Fast Charging】Supports 3A fast charging via USB-C socket, add 4 test pins to achieve powered between X703 and Raspberry Pi 4 without additional cable
【Working time】Work with single 18650 Lithium Ion battery with up to 4 hours working time, integrated over current protection, over voltage protection and battery reverse connection protection
【Multiple Onboard Interfaces】Allows power input via Type-C socket or XH2.54 connector; On-board PH2.0 connector allows to connect external power switch
【How to power】5Vdc +/-5% , ≥3A (Via Type-C Port of X703), Recommend 5V 4A 20W power supply (ASIN: B09J4V3RYK)
【Note】DON'T supports software safe shutdown.
【Jumper Cap Description】√① If [CHG] pin is OPEN, battery charging will be started after powering on(short press the on-board button to turn on) and stopped after powering off(press and hold for 2-3 seconds to turn off). If [CHG] pin is SHORT, the battery will be automatically charged once your power adapter connected. The purpose of adding the [CHG] jumper is to extend the life cycle of the battery by reducing the number of recharges. √② If [PON] pin is SHORT, power always on, power button disabled; If [PON] pin is OPEN, press power button to turn on, and hold 3s to turn off.
29,89 € SUR AMAZON
TUOPUONE
UPS HAT (D) Compatible avec Raspberry Pi Prend en charge la batterie 21700 Li (non incluse) Alimentation sans interruption 5 V Broches Pogo Connecto Prend en charge la charge et la sortie
78
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#8
▼ Montrer plus
▲ Montrer moins
✨ Puce de charge de batterie Li intégrée, avec gestion dynamique du chemin, alimentation plus stable. Puce convertisseur boost intégrée pour une puissance de sortie stable de 5 V
✨ Il s'agit du produit de développement officiel de Waveshare. Adopte un design de connecteur à broches pogo, compatible avec RPi 3/3B+/4B, etc.
✨Communication par bus I2C, surveille la tension des batteries, le courant, l'alimentation et la capacité restante en temps réel. Indicateurs LED intégrés pour surveiller l'état de fonctionnement de la batterie
✨ Circuits de protection de batterie multiples : protection contre les surcharges/décharges, protection contre les surintensités, protection contre les courts-circuits, plus sûre et stable
✨ Gestion MCU intégrée, prend en charge la détection de la connexion d'alimentation et le démarrage du RPi. Prend en charge l'affichage du niveau de batterie sur le système, facile à vérifier la capacité restante de la batterie
35,99 € SUR AMAZON
Geekworm
Geekworm Raspberry Pi 5 UPS (X1202), 4-Cell 18650 UPS (Max 5.1V 5A Output) with Wide 6-18V Input | Auto Power on | Safe Shutdown | Power Loss Detection
Livraison gratuite
75
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#9
▼ Montrer plus
▲ Montrer moins
【Compatibility】 for Raspberry Pi 5 8GB / 4GB / 2GB / 1GB
【Function】X1202 provides max 5.1V 5000mA Power Backup, intelligent and safe power management like auto power on, safe shutdown, full power-off from software, power loss and power adapter failure detection, on-board power button to power on/off
【Versatile Design】X1202 is designed to be attached on bottom, enabling easy stacking with other Raspberry Pi accessory boards for enhanced applications.
【How to Power】Power via DC 5521 power jack of X1202: 6-18Vdc , ≥3A (Recommend 12V 5A 60W PSU ASIN: B0BD81W6SN); OR power via USB-C port of X1202: 5Vdc 5A via USB Type-C (Recommended 5V 5A USB-C power adapter ASIN: B0CP8SRXSC)
【18650 Battery Reuirement】Battery length max 65.3mm, diameter max 18.5mm. NOTE: NOT include batteries!
【Packing List】 X1202 Expansion Board x 1, Screws Pack x 1 (Not include raspberry pi 5 motherboard, batteries or power adapter)
【Matching Case(NOT included)】Refer to X1202-C1 (ASIN: B0D4ZBXGSH)
60,89 € SUR AMAZON
Waveshare
Waveshare UPS Hat (D) for Raspberry Pi, Supports 21700 Li Batt (Not Included), 5V Uninterruptible Power Supply, Pogo Pins Connector, Supports Charging & Power Output at The Same Time
Livraison gratuite
68
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#10
▼ Montrer plus
▲ Montrer moins
Adopts pogo pins connector design, compatible with Raspberry Pi 3 / 3B+ / 4B, etc. I2C bus communication, monitoring the batt voltage, current, power, and remaining capacity in real time
Onboard Li batt charging chip, with dynamic path management, more stable power supply. Onboard MCU management, supports detecting power connection and booting the Pi
Multi batt protection circuits: over charge/discharge protection, over current protection, short circuit protection, more safe and stable
Onboard LED indicators for monitoring the batt operating status. Supports displaying batt level on the system, easy to check the batt remaining capacity
Onboard boost converter chip for stable 5V power output. Provide with online development resources and manual(Obtain from 24hour customer service)
35,99 € SUR AMAZON
ups hat raspberry pi
hat raspberry pi
raspberry pi hat
raspberry pi ups
ups raspberry pi
raspberry pi sata hat
raspberry pi tv hat
hat raspberry pi 4
raspberry pi 4 hat
raspberry pi audio hat
#1 GAGNANT
