Ups Raspberry Pi 4
Les 10 meilleurs produits en juillet 2025
Dernière mise à jour :
26 juillet 2025
Geekworm
Geekworm Raspberry Pi 4 UPS X703, Ultra-Compact 18650 UPS Shield with Auto Power on for Raspberry Pi 4 8GB/4GB/2GB Only
Livraison gratuite
98
QUALITÉ MAXIMALE
VOIR SUR AMAZON
Amazon.fr
#1 GAGNANT
▼ Montrer plus
▲ Montrer moins
【Compatibility】UPS with auto power on and Max 5.1V 4A output for Raspberry Pi 4 Model B 8GB/4GB/2GB, can also stack with other Raspberry Pi accessory boards or 3.5 inch screen for enhanced applications. NOT support Raspberry Pi 3
【3A Fast Charging】Supports 3A fast charging via USB-C socket, add 4 test pins to achieve powered between X703 and Raspberry Pi 4 without additional cable
【Working time】Work with single 18650 Lithium Ion battery with up to 4 hours working time, integrated over current protection, over voltage protection and battery reverse connection protection
【Multiple Onboard Interfaces】Allows power input via Type-C socket or XH2.54 connector; On-board PH2.0 connector allows to connect external power switch
【How to power】5Vdc +/-5% , ≥3A (Via Type-C Port of X703), Recommend 5V 4A 20W power supply (ASIN: B09J4V3RYK)
【Note】DON'T supports software safe shutdown.
【Jumper Cap Description】√① If [CHG] pin is OPEN, battery charging will be started after powering on(short press the on-board button to turn on) and stopped after powering off(press and hold for 2-3 seconds to turn off). If [CHG] pin is SHORT, the battery will be automatically charged once your power adapter connected. The purpose of adding the [CHG] jumper is to extend the life cycle of the battery by reducing the number of recharges. √② If [PON] pin is SHORT, power always on, power button disabled; If [PON] pin is OPEN, press power button to turn on, and hold 3s to turn off.
29,89 € SUR AMAZON
GeeekPi
GeeekPi Raspberry Pi UPS V5 Alimentation UPS Hat, Prise en Charge 18650 Chargeur de Batterie Power Bank Carte d'extension de Gestion de l'alimentation 5 V pour Raspberry Pi 4B/3B+/3B/2B/B+/B/A+/A
Livraison gratuite
96
QUALITÉ SUPÉRIEURE
VOIR SUR AMAZON
Amazon.fr
#2
▼ Montrer plus
▲ Montrer moins
UPS Plus est une nouvelle génération de module de gestion de l'alimentation UPS qui prend en charge la mise à niveau du micrologiciel OTA et prend en charge le RTC intégré.
Il y a deux puces INA219 à bord pour détecter la tension des batteries et la tension de sortie d'UPS Plus vers Raspberry Pi.
Compatible avec Raspberry Pi 4B/3B+/3B/2B/B+/B/A+/A
Contenu de l'emballage : 1 onduleur Plus pour Raspberry Pi, 4 piliers en cuivre M2.5, 4 vis M2.5, 4 bâtons longs en cuivre M2.5, 4 écrous M2.5, 1 bouclier en acrylique, 1 mode d'emploi.
Comment utiliser, veuillez vous référer à wiki.52pi.com/index.php?title=EP-0136
45,99 € SUR AMAZON
Waveshare
Waveshare UPS Hat (B) for Raspberry Pi 5/4B/3B+ 5V Uninterruptible Power Supply 5A High Current with Pogo Pins Connector
Livraison gratuite
92
QUALITÉ EXCELLENTE
VOIR SUR AMAZON
Amazon.fr
#3
▼ Montrer plus
▲ Montrer moins
Designed for Raspberry Pi series, compatible with Raspberry Pi 5 / Raspberry Pi 4B / Raspberry Pi 3B+ , etc.
I2C bus communication, monitoring the batteries voltage, current, power, and remaining capacity in real time
Multi battery protection circuits: over charge/discharge protection, over current protection, short circuit protection, and reverse protection, along with the equalizing charge feature, more safe and stable
Onboard 5V regulator, up to 5A continuous output current, more sufficient power source for Raspberry Pi
5V USB output, convenient for powering other boards Batteries warning indicators, easy to check if the battery is connected correctly
31,99 € SUR AMAZON
Waveshare
Waveshare UPS Hat (E) for Raspberry Pi 5/4B/3B+, Supports 4× 21700 Li Batteries (Not Included), Bi-Directional Fast Charging, 5V 6A Output, Pogo Pins Connector
Livraison gratuite
89
QUALITÉ DISTINGUÉE
VOIR SUR AMAZON
Amazon.fr
#4
▼ Montrer plus
▲ Montrer moins
The UPS HAT (E) is an uninterruptible power supply (UPS) expansion board specially designed for Raspberry Pi series. Onboard battery fuel gauge IC, fast charging chip and high-power buck chip to realize higher power input and output. Supports monitoring the operating state of the HAT via the I2C interface.
Adopts pogo pins connector design, compatible with Raspberry Pi 5 / 4B / 3B+. Supports displaying battery level on the system, easy to check the operating state of the HAT
Onboard Type-C port with bi-directional fast charging, supports multiple charging input / output protocols such as PD3.0, up to 40W charging power. Onboard high-power buck chip for stable 5V 6A power output
Onboard battery fuel gauge IC for reading battery voltage, current, power, remaining capacity and other parameters. Onboard MCU management, supports detecting power connection and booting the Pi
Supports I2C bus communication for monitoring the operating status of Type-C port and batteries in real time. Supports 4× 21700 Li batteries (NOT included), larger capacity and longer battery life. Can provide with online development resources and manual
44,99 € SUR AMAZON
Coolwell
Uninterruptible Power Supply UPS Module for for Raspberry Pi 4B+ 4B 3B+ 3B 2B+ Zero W WH Jetson Nano Supports Charging and Power Output at The Same Time 3S & 5V 5A Output
Livraison gratuite
87
QUALITÉ FIABLE
VOIR SUR AMAZON
Amazon.fr
#5
▼ Montrer plus
▲ Montrer moins
This 5V ups module adapting various interfaces via cables, easy to integrate into mobile robots or industrial control equipment
The Raspberry Pi ups power supply module with onboard 5V regulator, up to 5A continuous output current, more sufficient power source for Raspberry Pi and Jetson Nano
The Raspberry Pi ups board has multi battery protection circuits: over charge/discharge protection, over current protection, short circuit protection, and reverse protection, along with the equalizing charge feature, more safe and stable
The Raspberry pi ups 18650 has I2C bus communication, monitoring the batteries voltage, current, power in real time; Batteries warning indicators, easy to check if the battery is connected correctly
Feel free to contact us if you need technical support
30,90 € SUR AMAZON
Waveshare
Waveshare UPS Hat, Stable 5V Power Output, Uninterruptible Power Supply for Raspberry Pi
Livraison gratuite
81
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#6
▼ Montrer plus
▲ Montrer moins
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero/Zero W/Zero WH
I2C bus communication, monitoring the batteries voltage, current, power, and remaining capacity in real time
Multi battery protection circuits: over charge/discharge protection, over current protection, short circuit protection, and reverse protection, along with the equalizing charge feature, more safe and stable
Onboard 5 V regulator, up to 2.5 A continuous output current. 5 V USB output, convenient for powering other boards
Batteries warning indicators, easy to check if the battery is connected correctly. Comes with development resources and manual (English language not guaranteed)
34,99 € SUR AMAZON
Waveshare
Waveshare UPS Hat 5V Alimentation sans Interruption pour Raspberry Pi 4B/3B+/3B, Jusqu'à 5A Courant, Pogo Pins Connecteur, Régulateur 5V Embarqué et Circuits de Protection Multi-Batteries, I2C Bus
78
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#7
▼ Montrer plus
▲ Montrer moins
【5V UPS HAT (B) for Raspberry Pi】Uninterruptible Power Supply designed for Raspberry Pi series, compatible with Raspberry Pi 3 / 3B+ / 4B, etc. powering the Raspberry Pi via Pogo Pins, without using any GPIO resource
【Real Time Monitoring】I2C bus communication, monitoring the batteries voltage, current, power, and remaining capacity in real-time via I2C
【Safe and Stable Circuit Design】Multi battery protection circuits for over charge/discharge, over current, short circuit, and reverse, along with the equalizing charge feature, more safe and stable
【5V USB Output As Well】5V USB output, convenient for powering other boards
【Battery Warning Indicators】Easy to check if the battery is connected correctly
34,95 € SUR AMAZON
PI PISUGAR
Pisugar S Plus Portable 5000 mAh UPS Lithium Battery Power Module Platform for Every Raspberry Pi 3B/3B+/4B Model Accessories handhold(Not Include Raspberry Pi)
Livraison gratuite
78
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#8
▼ Montrer plus
▲ Montrer moins
UPS function: The external power supply is disconnected to continuously supply power and obtain the external power status. External power access can trigger boot, suitable for unattended projects.
Input and output: 5V3A output, 5V3A input
GPIO button: It can trigger the device to turn on when it is turned off, and it can be used as a custom button after turning on (when the automatic power-on function is turned off)
Bottom connection: convenient connection method, complete installation in one minute, without affecting GPIO expansion
Expansion: Expansion through wireless charging and solar charging
39,99 € SUR AMAZON
Geekworm
Geekworm Raspberry Pi UPS, X728 V2.3 (Max 5.1V 6A) 18650 UPS with Power Loss Detection & Auto on & Safe Shutdown & Buzzer for Raspberry Pi 5 / Raspberry Pi 4 / 3B+ / 3B / 2B
Livraison gratuite
72
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#9
▼ Montrer plus
▲ Montrer moins
【Function】X728 V2.3 provides max 5.1V 6000mA Power Backup, intelligent and safe power management, safe shutdown, auto power-on, full poweroff from software, RTC real- time clock, and a buzzer
【Support External Battery Holder】Can connect external battery holder to increase battery capacity
【How to Power】Power via X728 USB-C port: 5Vdc ±5%, ≥3A; Via X728 DC power jack : 5Vdc ±5%, ≥4A; Recommend Geekworm 20W 5V 4A USB C PSU (ASIN: B09J4V3RYK)
【Packing List】 X728 V2.3 Expansion Board x 1, Screws Pack x 1 (Not include raspberry pi motherboard or batteries)
【Matching Case (Not included): N300 Case (ASIN: B07WZXPR2W), P165-A (ASIN: B089CK12C6), P165-B (ASIN: B08N617L1J)
【Other Geekworm UPS Recommended】X703 ultra-compact ups (ASIN: B09HZXDN8S);
52,89 € SUR AMAZON
GeeekPi
GeeekPi Mini Tower UPS Kit, boîtier Raspberry Pi 4 avec Refroidisseur Ice Tower, Ventilateur RVB, dissipateur Thermique Raspberry Pi, écran OLED 0,96 Pouces et UPS Plus pour Raspberry Pi 4 modèle B
Livraison gratuite
69
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#10
▼ Montrer plus
▲ Montrer moins
Support Raspberry Pi 4 Model B 1GB 2GB 4GB 8GB only; Support OLED display, UPS Plus integration, ICE Tower Cooler integration.
The 0.96 inch OLED screen was already mounted on the case. It can display the running status of Raspberry Pi or UPS Plus through programming, such as Raspberry Pi’s IP address, CPU temperature, disk utilization, CUP load, memory status and other system information.
The fan on super ICE Tower Cooler upgraded to PWM RGB fan. Tower structure, 5mm copper tube, multi-layer heat sinks, 7 blades powerful fan, all the above combinations make this super radiator for Raspberry Pi. In the case of overclocking, it can reduce the temperature of the Raspberry Pi from 80℃ to 40℃.
The UPS Plus hat will charge the batteries while providing power output at the same time from an external power source and it can automatically switch to batteries output when external power supply is unavailable, keeping the system running trouble-free. It also can power Raspberry Pi via Pogo Pins without using any GPIO resources.
Package Includes: 1 x ABS Mini Tower Case, 2 x Acrylic side panel,1 x 0.96 inch OLED Display(already mounted on the case ),1 x UPS Plus Hat(18650 lithium battery is NOT Included), 1 x ICE Tower Cooler, 1x GPIO Edge Extention,1x Assembly Manual (Note: Raspberry Pi 4B is Not included in the package)
Support technologique : wiki.52pi.com/index.php?title=ZP-0129
43,78 € SUR AMAZON
raspberry pi 4 ups
pi 4 raspberry
raspberry 4 pi
raspberry pi 4
raspberry pi 4 4
raspberry pi ups
ups raspberry pi
raspberry pi 4 android
raspberry pi 4 ventilateur
ventilateur raspberry pi 4
#1 GAGNANT
