Waveshare Hat
Les 10 meilleurs produits en juin 2025
Dernière mise à jour :
10 juin 2025
Waveshare
Waveshare Universal e-Paper Driver Hat Supports Various Waveshare SPI E-Paper Raw Panels Compatible with Raspberry Pi and Jetson Nano
Livraison gratuite
99
QUALITÉ MAXIMALE
VOIR SUR AMAZON
Amazon.fr
#1 GAGNANT
▼ Montrer plus
▲ Montrer moins
This is a universal driver board for e-Paper raw panels, can be used to drive various SPI interface e-Paper from Waveshare
Universal e-Paper Driver HAT, supports various Waveshare SPI e-Paper raw panels
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.Onboard voltage translator, compatible with 3.3V/5V MCUs
Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
14,99 € SUR AMAZON
Waveshare
Waveshare E-Paper Driver Hat, Compatible with Raspberry/Nucleo Main Control Boards, for Waveshare SPI Interface E-Paper Raw Panels
Livraison gratuite
97
QUALITÉ SUPÉRIEURE
VOIR SUR AMAZON
Amazon.fr
#2
▼ Montrer plus
▲ Montrer moins
Designed for Raspberry Pi 40pin GPIO interface, suitable for Raspberry Pi series motherboard/Jetson Nano
Lead out SPI control interface, suitable for Raspberry Pi/Nucleo main control board, etc.
Onboard level conversion chip, for 3.3V and 5V microcontroller interface
Provide complete supporting information manual (example program for Raspberry Pi/Jetson Nano/STM32)
14,99 € SUR AMAZON
Waveshare
Waveshare 2.13inch e-Paper Display Hat 250x122 Resolution SPI E-Ink Screen Electronic Paper Module with Embedded Controller Partial Refresh for Raspberry Pi Zero/Zero W/Zero WH for pwnagotchi Project
Livraison gratuite
94
QUALITÉ EXCELLENTE
VOIR SUR AMAZON
Amazon.fr
#3
▼ Montrer plus
▲ Montrer moins
No backlight, keeps displaying last content for a long time even when power down.
Note:V4(the latest version), Please use corresponding demo code verison
Ultra low power consumption, basically power is only required for refreshing
SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc. Onboard voltage translator, compatible with 3.3V/5V MCUs. Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+,Jetson Nano
Comes with development resources and manual (examples for Raspberry/Jetson Nano/Arduino/STM32). Please contact our 24-hour customer service for relevan
20,59 € SUR AMAZON
Waveshare
Universal e-Eink Driver HAT Supports Various Waveshare SPI e-Paper Raw Display Panels for Connecting with Raspberry/Arduino/Nucleo
92
QUALITÉ EXCELLENTE
VOIR SUR AMAZON
Amazon.fr
#4
▼ Montrer plus
▲ Montrer moins
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc
Onboard voltage translator, compatible with 3.3V/5V MCUs
Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32),download link: www.waveshare.com/wiki/e-Paper_Driver_HAT
14,39 € SUR AMAZON
Waveshare
Waveshare UPS Hat (E) for Raspberry Pi 5/4B/3B+, Supports 4× 21700 Li Batteries (Not Included), Bi-Directional Fast Charging, 5V 6A Output, Pogo Pins Connector
Livraison gratuite
84
QUALITÉ FIABLE
VOIR SUR AMAZON
Amazon.fr
#5
▼ Montrer plus
▲ Montrer moins
The UPS HAT (E) is an uninterruptible power supply (UPS) expansion board specially designed for Raspberry Pi series. Onboard battery fuel gauge IC, fast charging chip and high-power buck chip to realize higher power input and output. Supports monitoring the operating state of the HAT via the I2C interface.
Adopts pogo pins connector design, compatible with Raspberry Pi 5 / 4B / 3B+. Supports displaying battery level on the system, easy to check the operating state of the HAT
Onboard Type-C port with bi-directional fast charging, supports multiple charging input / output protocols such as PD3.0, up to 40W charging power. Onboard high-power buck chip for stable 5V 6A power output
Onboard battery fuel gauge IC for reading battery voltage, current, power, remaining capacity and other parameters. Onboard MCU management, supports detecting power connection and booting the Pi
Supports I2C bus communication for monitoring the operating status of Type-C port and batteries in real time. Supports 4× 21700 Li batteries (NOT included), larger capacity and longer battery life. Can provide with online development resources and manual
44,99 € SUR AMAZON
Waveshare
Waveshare PCIe to M.2 Hat+ Adapter with PoE for Raspberry Pi 5, with Cooler Fan, Support NVMe Drive Protocol 2230/2242 M.2 Solid State Drive & 802.3af/at Network Standard, High-Speed Reading/Writing
Livraison gratuite
81
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#6
▼ Montrer plus
▲ Montrer moins
PCIe To M.2 with PoE HAT,designed for Raspberry Pi 5, supports IEEE 802.3af/at network standard. Adapter for NVMe Protocol M.2 Solid State Drive, High-speed Reading/Writing.
Improves reading/writing speed of your Pi. Note: Only supports the NVMe Protocol Solid State Drives.
Based on 16PIN PCIe Interface of Raspberry Pi 5. Standard Raspberry Pi 40PIN GPIO stackable header, allows connecting other HATs
Onboard Dual LED Indicators,easy to monitor the Working Status. Compatible With 2230/2242 Size M.2 Solid State Drive. Supports Gen2 and Gen3 Modes, Supports Booting PI5 From Solid State Drive.
Providing both network connection and power supply for your Raspberry Pi in one cable
5V header provides up to 4.5A output (MAX 25W for 12V+5V total output power). be able to power extra devices while providing stable power to Raspberry Pi.
️Rich WiKi Resources️ We provide official Wiki resources, please contact us for more information.
35,99 € SUR AMAZON
Waveshare
Waveshare UPS Hat (B) for Raspberry Pi 5/4B/3B+ 5V Uninterruptible Power Supply 5A High Current with Pogo Pins Connector
Livraison gratuite
80
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#7
▼ Montrer plus
▲ Montrer moins
Designed for Raspberry Pi series, compatible with Raspberry Pi 5 / Raspberry Pi 4B / Raspberry Pi 3B+ , etc.
I2C bus communication, monitoring the batteries voltage, current, power, and remaining capacity in real time
Multi battery protection circuits: over charge/discharge protection, over current protection, short circuit protection, and reverse protection, along with the equalizing charge feature, more safe and stable
Onboard 5V regulator, up to 5A continuous output current, more sufficient power source for Raspberry Pi
5V USB output, convenient for powering other boards Batteries warning indicators, easy to check if the battery is connected correctly
31,99 € SUR AMAZON
Waveshare
Waveshare Power Over Ethernet Hat E Type Support 802.3af PoE Network Standard, Fully Isolated Switched-Mode Power Supply (SMPS), Compatible with Raspberry Pi 3B+/4B
Livraison gratuite
76
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#8
▼ Montrer plus
▲ Montrer moins
Fully isolated switched-mode power supply (SMPS): Enhance device anti-interference ability and security
Suitable for the Raspberry Pi 3B+/4B, it can be used with the official Raspberry Pi case without taking up more space.
PoE (Power Over Ethernet) capability，IEEE 802.3af-compliant. Fully isolated switched-mode power supply (SMPS).
Smaller and more flexible with a more compact component layout. By using this small HAT and some proper 802.3af-compliant power sourcing equipments, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable.
POE Power Input: 37V~57V DC. POE Power Output: 5V/2.5A DC. Network Standard: 802.3af PoE-compliant. Dimensions: 65.00 × 32.00mm.
25,99 € SUR AMAZON
Waveshare
Waveshare 2.13 inch e-Paper Display Hat V4 250x122 Resolution E-Ink Screen Electronic Paper Module with Embedded Controller SPI Interface for Raspberry Pi Zero/Zero W/Zero WH for pwnagotchi Project
Livraison gratuite
70
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#9
▼ Montrer plus
▲ Montrer moins
Il s'agit d'un écran E-Ink Hat pour Raspberry Pi, 5,4 cm, 250 x 122 résolution, avec un contrôleur intégré, communique via interface SPI, prend en charge la régénération partielle.
Pas de rétroéclairage, maintient d'afficher du contenu dernière pendant une longue période, même lorsque l'alimentation vers le bas
Ultra faible consommation d'énergie, alimentation est nécessaire uniquement pour la rafraîchissante.
Compatible avec Raspberry Pi 2B/3B/zéro/zéro W, livré avec des ressources de développement et le manuel (exemples pour Raspberry Pi Arduino/stm32). Veuillez contacter notre service à la clientèle 24h / 24 pour obtenir les ressources et manuels pertinents.
préservé solder pads pour interface SPI, le contrôleur pour le raccordement avec d'autres Conseils tels que Arduino/nucleo, etc.
20,59 € SUR AMAZON
Waveshare
Waveshare PoE Power Over Ethernet Hat (F) Compatibele with Raspberry Pi 5, High Power, Onboard Cooling Fan, with Metal Heatsink, Supports 802.3af/at Network Standard
Livraison gratuite
68
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#10
▼ Montrer plus
▲ Montrer moins
The PoE HAT (F) is a 802.3af/at-compliant Power Over Ethernet accessory for the Raspberry Pi 5. By using this small HAT and some proper 802.3af/at-compliant power sourcing equipments, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable.
Standard Raspberry Pi 40PIN GPIO header, supports Raspberry Pi 5
PoE (Power Over Ethernet) capability，IEEE 802.3af/at-compliant Fully isolated switched-mode power supply (SMPS)
Onboard high speed active cooling fan, with metal heatsink, better heat dissipation
Provide e-user manual, please check the manual carefully before using!
30,99 € SUR AMAZON
waveshare ups hat
waveshare game hat
waveshare poe hat
waveshare
#1 GAGNANT
