Waveshare 5 Round
Les 10 meilleurs produits en août 2025
Dernière mise à jour :
7 août 2025
Waveshare
Waveshare 1.69inch Round LCD， Compatible with Raspberry Pi 5, Display Module with Touch Panel, Micro LCD Display, 240×280 Resolution, IPS, SPI and I2C Communication, 262K Display Color
Livraison gratuite
98
QUALITÉ MAXIMALE
VOIR SUR AMAZON
Amazon.fr
#1 GAGNANT
▼ Montrer plus
▲ Montrer moins
240×280 resolution, 262K colors, clear and colorful displaying effect
High touch screen transmittance, fast response and long lifetime
Embedded ST7789V2 driver chip and CST816T capacitive touch control chip, using SPI and I2C communication respectively, minimizes required IO pins, supports controller boards like Raspberry Pi / ESP32S3 / Raspberry Pi Pico / Arduino / STM32
Comes with online development resources and manual (examples for Raspberry Pi / ESP32S3 / Raspberry Pi Pico / Arduino / STM32)
Compatible With 3.3V / 5V Power Input
23,99 € SUR AMAZON
Waveshare
Waveshare ESP32-S3 1.85inch Round LCD Development Board, 360x360, Supports Wi-FI & BT BLE 5, AI Speech, ESP32 with Display with Smart Speaker Box(3.7V Lithium Batt Not Included)
97
QUALITÉ SUPÉRIEURE
VOIR SUR AMAZON
Amazon.fr
#2
▼ Montrer plus
▲ Montrer moins
ESP32-S3-Touch-LCD-1.85C-BOX-EN is a microcontroller development board with Smart Speaker Box(3.7V Lithium batt not included) with 2.4GHz Wi-Fi and BT BLE 5 support, integrates high-capacity Flash and PStatic RAM
Onboard 1.85inch LCD display which can smoothly run GUI programs such as LVGL. Combined with various peripheral interfaces, it is suitable for the quick development of the HMI and other ESP32-S3 applications.
Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna
Built-in 512KB Static RAM and 384KB ROM, with onboard 16MB Flash and 8MB PStatic RAM. Onboard 1.85inch LCD display, 360x360 resolution, 262K color. Supports capacitive touch controlled via I2C interface, with interrupt support
Adapting UART, I2C and some IO interfaces. Onboard audio decoder, Microphone, RTC sensor, TF card slot and batt recharge management module, etc. Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios
47,99 € SUR AMAZON
Waveshare
Waveshare PoE Power Over Ethernet Hat (F) Compatibele with Raspberry Pi 5, High Power, Onboard Cooling Fan, with Metal Heatsink, Supports 802.3af/at Network Standard
Livraison gratuite
93
QUALITÉ EXCELLENTE
VOIR SUR AMAZON
Amazon.fr
#3
▼ Montrer plus
▲ Montrer moins
The PoE HAT (F) is a 802.3af/at-compliant Power Over Ethernet accessory for the Raspberry Pi 5. By using this small HAT and some proper 802.3af/at-compliant power sourcing equipments, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable.
Standard Raspberry Pi 40PIN GPIO header, supports Raspberry Pi 5
PoE (Power Over Ethernet) capability，IEEE 802.3af/at-compliant Fully isolated switched-mode power supply (SMPS)
Onboard high speed active cooling fan, with metal heatsink, better heat dissipation
Provide e-user manual, please check the manual carefully before using!
30,99 € SUR AMAZON
Waveshare
Waveshare 1.69inch Round Touch LCD Display Module 240×280 Resolution 262K Display Color LCD IPS Screen for Raspberry Pi 5, Arduino, ESP32S3,Pico,Embedded ST7789V2 Driver Chip,SPI Interface
90
QUALITÉ DISTINGUÉE
VOIR SUR AMAZON
Amazon.fr
#4
▼ Montrer plus
▲ Montrer moins
1.69inch Round LCD Display Module with Touch panel, Micro LCD Display
240×280 resolution, 262K colors, clear and colorful displaying effect
High touch screen transmittance, fast response and long lifetime
Embedded ST7789V2 driver chip and CST816T capacitive touch control chip, using SPI and I2C communication respectively, minimizes required IO pins, supports controller boards like Raspberry Pi 5 / ESP32S3 / Raspberry Pi Pico / Arduino / STM32
Comes with online development resources and manual (examples for Raspberry Pi / ESP32S3 / Raspberry Pi Pico / Arduino / STM32)
23,03 € SUR AMAZON
Waveshare
Waveshare ESP32-S3 Development Board with 1.28inch Round LCD Display,32-bit LX7 Dual-Core Processor,Support 2.4 GHz Wi-FI and Bluetooth 5(Le),Embedded GC9A01 Driver Chip
Livraison gratuite
85
QUALITÉ FIABLE
VOIR SUR AMAZON
Amazon.fr
#5
▼ Montrer plus
▲ Montrer moins
Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency
Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (BLE), with onboard antenna.Built in 512KB of SRAM and 384KB ROM, with onboard 2MB PSRAM and an external 16MB Flash memory
Type-C connector, keeps it up to date, easier to use.Onboard 1.28inch LCD display, round IPS panel, 240×240 resolution, 65K color
Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture.Onboard 3.7V lithium battery recharge/discharge header and GPIO headers
Supports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios.Integrated with USB serial port full-speed controller, GPIO pins allow flexibly configuring pin functions
23,99 € SUR AMAZON
Waveshare
Waveshare ESP32-S3 2.1inch LCD Capacitive Touch Round Display Development Board, 480×480 IPS Screen I2C Touch Panel with 32-bit LX7 Dual-Core Processor, Supports 2.4GHz WiFi & BLE 5, 262K Color
Livraison gratuite
82
QUALITÉ FIABLE
VOIR SUR AMAZON
Amazon.fr
#6
▼ Montrer plus
▲ Montrer moins
Onboard 2.1inch capacitive touch screen can smoothly run GUI programs such as LVGL. Combined with various peripheral interfaces, suitable for the quick development of the HMI and other ESP32-S3 applications.
Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency
Built-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM. Onboard 2.1inch capacitive touch display, 480×480 resolution, 262K color
Adapting UART, I2C and some IO interfaces, integrates full-speed USB port. Onboard QMI8658 6-axis sensor, RTC sensor, TF card slot and batt recharge management module, etc.
Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna. Supports touch control via I2C interface, with interrupt support
45,99 € SUR AMAZON
Waveshare
Waveshare ESP32-S3 1.85inch Round LCD Development Board, 360x360, Supports WiFi & BT BLE 5, AI Speech, ESP32 with Display, Support Smart Speaker Box(Not Included) & 3.7V Lithium Batt(Not Included)
Livraison gratuite
81
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#7
▼ Montrer plus
▲ Montrer moins
ESP32-S3-Touch-LCD-1.85C is a microcontroller development board with 2.4GHz Wi-Fi and BT BLE 5 support, integrates high-capacity Flash and PStatic RAM
Onboard 1.85inch LCD display which can smoothly run GUI programs such as LVGL. Combined with various peripheral interfaces, it is suitable for the quick development of the HMI and other ESP32-S3 applications.
Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna
Built-in 512KB Static RAM and 384KB ROM, with onboard 16MB Flash and 8MB PStatic RAM. Onboard 1.85inch LCD display, 360x360 resolution, 262K color. Supports capacitive touch controlled via I2C interface, with interrupt support
Adapting UART, I2C and some IO interfaces. Onboard audio decoder, Microphone, RTC sensor, TF card slot and batt recharge management module, etc. Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios
44,99 € SUR AMAZON
Waveshare
Waveshare ESP32-S3 RGB LCD Driver Board with 480×480 4inch TFT RGB Round Touch Display Capacitive 5-Point Touch, with 32-Bit 240MHz LX7 Dual-Core Processor, 8MB PSRAM and Flash, W-FI & Blue-T Support
Livraison gratuite
75
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#8
▼ Montrer plus
▲ Montrer moins
This comes with a 4inch RGB round touch display. For more detailed part list, please refer to the Package Content image.
Adopts ESP32-S3-WROOM-1-N8R8 module with Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz. Integrated 512KB SRAM, 384KB ROM, 8MB PSRAM, 8MB Flash memory.
Integrated 2.4GHz W-Fi and Blue-T LE dual-mode wire-less communication, with superior RF performance. Type-C connector, easier to use.
Onboard 40Pin SPI+RGB and 18Pin SPI LCD screen connector, strong compatibility and expandability Onboard Lithium batt recharge manager ETA6096 and MX1.25 lithium batt header
Castellated module allows soldering direct to carrier boards Supports multiple low-power operating states, adjustable balance between communication distance, data rate and power consumption to meet the power requirements of various application scenarios
45,99 € SUR AMAZON
Waveshare
Waveshare ESP32-S3 RGB LCD Driver Board with 480×480 2.8inch TFT RGB Round Display Capacitive 5-Point Touch, with 32-Bit 240MHz LX7 Dual-Core Processor, 8MB PSRAM and Flash, W-FI & Blue-T Support
Livraison gratuite
72
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#9
▼ Montrer plus
▲ Montrer moins
This comes with a 2.8inch RGB round touch display. For more detailed part list, please refer to the Package Content image.
Adopts ESP32-S3-WROOM-1-N8R8 module with Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz. Integrated 512KB SRAM, 384KB ROM, 8MB PSRAM, 8MB Flash memory.
Integrated 2.4GHz W-Fi and Blue-T LE dual-mode wire-less communication, with superior RF performance. Type-C connector, easier to use.
Onboard 40Pin SPI+RGB and 18Pin SPI LCD screen connector, strong compatibility and expandability Onboard Lithium batt recharge manager ETA6096 and MX1.25 lithium batt header
Castellated module allows soldering direct to carrier boards Supports multiple low-power operating states, adjustable balance between communication distance, data rate and power consumption to meet the power requirements of various application scenarios
53,99 € SUR AMAZON
Waveshare
Waveshare Power Over Ethernet Hat (H), Compatible with Raspberry Pi 5 / CM 5, 5V 5A Output, Stable Performance, Supports 802.3af/at Network, Isolated Switched-Mode Power Supply, PoE Hat, Board Only
Livraison gratuite
67
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#10
▼ Montrer plus
▲ Montrer moins
IEEE 802.3af/at Compliance: The PoE HAT (H) is fully compliant with the IEEE 802.3af/at Power over Ethernet (PoE) standards, enabling seamless power and network connectivity through a single Ethernet cable when connected to a compatible PoE router or switch.
Standard GPIO Header: The board is equipped with a standard 40-pin GPIO header, ensuring compatibility with Raspberry Pi 5 and CM 5, allowing easy integration into a variety of projects and applications.
Stable Power Performance: Featuring an onboard original IC solution, the PoE HAT (H) ensures more stable PoE power delivery, providing reliable power supply for the Raspberry Pi even under load.
Isolated Switched-Mode Power Supply (SMPS): The HAT adopts an isolated switched-mode power supply, offering improved efficiency and protection against electrical noise, making it more robust and suitable for industrial and long-term use.
Compact and Easy to Assemble: With its compact design and simple assembly, the PoE HAT (H) is easy to integrate into your Raspberry Pi setup, saving space while offering reliable power and network connectivity in a single unit. Rich WiKi Resources: We provide official Wiki resources, please visit our store and click the wiki page to get resources.
33,99 € SUR AMAZON
waveshare 5
waveshare 5 inch
#1 GAGNANT
