Touch Display Development Board
Les 10 meilleurs produits en juin 2025
Dernière mise à jour :
9 juin 2025
Waveshare
Waveshare ESP32-S3 2.8inch Capacitive Touch Display Development Board, 240x320, IPS, 5-Point Touch, 32-Bit LX7 Dual-Core Processor, Up to 240MHz Frequency, Supports WiFi & BT, Onboard Antenna
Livraison gratuite
98
QUALITÉ MAXIMALE
VOIR SUR AMAZON
Amazon.fr
#1 GAGNANT
▼ Montrer plus
▲ Montrer moins
Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency
Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna. Supports capacitive touch control via I2C interface, 5-point touch with interrupt support
Built-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM. Adapting UART, I2C and some IO interfaces, integrates full-speed USB port
Onboard 2.8inch capacitive touch display, 240×320 resolution, 262K color. Onboard speaker, QMI8658 6-axis sensor, RTC sensor, TF card slot and battery recharge management module, etc.
Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios
37,99 € SUR AMAZON
Waveshare
Waveshare ESP32-S3 2inch Capacitive Touch Display Development Board, 240x320, IPS, 32-Bit LX7 2-Core Processor, Up to 240MHz Frequency, Support WiFi BT, Support OV5640 5MP Camera Module(Not Included)
Livraison gratuite
98
QUALITÉ MAXIMALE
VOIR SUR AMAZON
Amazon.fr
#2
▼ Montrer plus
▲ Montrer moins
Equipped with ESP32-S3R8 Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna
Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and an external 16MB Flash memory. Type-C connector, improving device compatibility, easier to use. Onboard 2inch capacitive touch display for clear color picture display, 240 x 320 resolution, 262K color
Built-in ST7789T3 display driver and CST816D capacitive touch chip, using SPI and I2C communication respectively, effectively saving the IO resources
Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope).Onboard 3.7V MX1.25 Lithium battery recharge/discharge header. Onboard USB Type-C port for power supply, program downloading, and debugging, more convenient for development use
Onboard TF card slot for external TF card storage of pictures or files. Adapting 22 x GPIO pins for flexible configuration of pin function. Onboard camera interface, compatible with mainstream cameras such as OV2640(NOT Included) and OV5640(NOT Included) for image and video acquisition
27,99 € SUR AMAZON
Waveshare
Waveshare ESP32-S3 1.69inch Touch Display Development Board, 240×280 Pixels, 262K Color, Compact Size, Micro LCD Display with ESP32-S3, Accelerometer and Gyroscope Sensor
Livraison gratuite
93
QUALITÉ EXCELLENTE
VOIR SUR AMAZON
Amazon.fr
#3
▼ Montrer plus
▲ Montrer moins
Equipped with ESP32-S3R8 Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and an external 16MB Flash memory. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna
Type-C connector, keeps it up to date, easier to use. Onboard 1.69inch 240X280 pixels 262K capacitive touch display for clear color pictures. Built-in ST7789V2 display driver and CST816T capacitive touch chip, using SPI and I2C communication respectively, effectively saving the IO resources
Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture, counting steps, etc. Onboard PCF85063 RTC chip with reserved SH1.0 RTC battery header (supports charging) for RTC function requirement
Onboard RST, BOOT and a programmable PWM button for easy custom function development. Onboard 3.7V MX1.25 lithium battery recharge/discharge header. High touch screen transmittance, fast response and long lifetime
Reserved pads of 4 x GPIO, I2C, and UART interface, for connecting peripherals and debugging. Supports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios
32,99 € SUR AMAZON
Waveshare
Waveshare ESP32-S3 1.8inch AMOLED Touch Display Development Board, 32-Bit LX7 Dual-Core Processor, 368x448, Accelerometer&Gyroscope Sensor, ESP32 with Display, Support 3.7V Li Battery(Not Included)
Livraison gratuite
92
QUALITÉ EXCELLENTE
VOIR SUR AMAZON
Amazon.fr
#4
▼ Montrer plus
▲ Montrer moins
Equipped with ESP32-S3R8 Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna. Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and an external 16MB Flash memory. Type-C connector, improving device compatibility, easier to use
Onboard 1.8inch AMOLED display for clear color picture display, 368 x 448 resolution, 16.7M color. Built-in SH8601 display driver and FT3168 capacitive touch chip, using QSPI and I2C communication respectively, effectively saving the IO resources. Onboard PWR and BOOT programmable buttons for easy custom function development
Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture, counting steps, etc. Onboard PCF85063 RTC chip, powered by main Lithium battery through AXP2101 chip, with reserved RTC battery pads for connecting a backup battery, ensuring RTC function during the replacement of the main battery. Onboard 3.7V MX1.25 Lithium battery recharge/discharge header, Support 3.7V Lithium battery(NOT Included)
Reserved pads of 7 x GPIO, 1 x I2C, 1 x UART, and 1 x USB interface, for connecting peripherals and debugging. Onboard TF card slot for extended storage and fast data transfer, suitable for applications such as data recording and media playback, simplifying circuit design
Adopts AXP2101 IC for efficient power management, supports multiple voltage outputs, battery charging, battery management, and battery life optimization, etc. Adopts AMOLED screen, featuring advantages of high contrast, wide viewing angle, rich colors, fast response, thinner design, and low power consumption, etc
41,99 € SUR AMAZON
Waveshare
Waveshare ESP32-S3 7inch Capacitive Touch LCD Development Board, ESP32 with Display, 800×480, 5-Point Touch, 240MHz, Supports WiFi, Onboard Antenna, Suitable for ESPHome/Home Assistant Project
Livraison gratuite
82
QUALITÉ FIABLE
VOIR SUR AMAZON
Amazon.fr
#5
▼ Montrer plus
▲ Montrer moins
[Dual-core Processor] Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency
[Onboard Antenna] Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna. Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and 8MB Flash
[7inch Capacitive Touch Display] Onboard 7inch capacitive touch display, 800×480 resolution, 65K color. Supports capacitive touch control via I2C interface, 5-point touch with interrupt support
[Various Peripheral Interfaces] Combined with various peripheral interfaces, suitable for the quick development of the HMI and other ESP32-S3 applications. Supports flexible clock, module power supply independent setting, and other control to realize low power consumption in different scenarios
[Supports Flexible Clock] Module power supply independent setting, and other control to realize low power consumption in different scenarios
53,99 € SUR AMAZON
Waveshare
Waveshare RP2350 2.8inch Capacitive Touch Display Development Board, 240x320, IPS Panel, 5-Point Touch, SPI Interface Display, Accelerometer and Gyroscope Sensor, Dual-Core & Dual-Architecture Design
Livraison gratuite
81
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#6
▼ Montrer plus
▲ Montrer moins
RP2350-Touch-LCD-2.8 is a high-performance MCU board designed by Waveshare. Onboard 2.8inch capacitive touch display, capable of smoothly running GUI programs such as LVGL. Integrates Lithium battery recharge manager, 6-axis sensor (3-axis accelerometer and 3-axis gyroscope), RTC chip, and so on, making it easy to develop and integrate into products quickly.
RP2350 microcontroller chip designed by Raspberry Pi. Adopts unique dual-core and dual-architecture design: dual-core ARM Cortex-M33 processor and dual-core Hazard3 RISC-V processor, flexible clock running up to 150 MHz
520KB of Static RAM, and 16MB onboard Flash memory. Onboard 2.8inch LCD display, 240x320 resolution, 262K color. Supports capacitive touch function controlled via I2C interface, 5-point touch, with interrupt support
Adapting UART, I2C and some IO interfaces, integrates full-speed USB port. Onboard speaker, QMI8658 6-axis sensor, RTC sensor, TF card slot and battery recharge management module, etc.
Drag-and-drop programming using mass storage over USB. Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios
32,99 € SUR AMAZON
Waveshare
Waveshare RP2350 2inch Capacitive Touch Display Development Board,240×320 Pixels, IPS Panel, 262K Color, Onboard Camera Interface, with OV5640 Camera Module
Livraison gratuite
79
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#7
▼ Montrer plus
▲ Montrer moins
Dual-Core Processor Architecture: The RP2350 microcontroller features a unique dual-core design, combining an Arm Cortex-M33 processor and a Hazard3 RISC-V processor. This allows for flexible performance with a clock speed of up to 150 MHz, offering high efficiency and low power consumption for various applications.
Large Memory and Storage: Equipped with 520KB Static RAM and 16MB onboard Flash memory, the RP2350-Touch-LCD-2 offers ample space for program storage and data processing, making it suitable for memory-intensive tasks and complex applications.
Touch Display and Camera Interface: The board features an onboard 2-inch capacitive touch display with a 240 × 320 resolution and 262K colors, ideal for interactive projects. Additionally, it includes a camera interface compatible with popular cameras like the OV2640 and OV5640, allowing for easy image and video capture.
Versatile Connectivity and Expansion: With support for USB 1.1 (device and host), Type-C connectivity, and a variety of I/O options (22 × GPIO pins, 2 × SPI, 2 × I2C, 2 × UART, 2 × ADC channels, 14 × PWM), this board offers extensive expansion possibilities for custom applications and peripheral integration.
Low Power and Efficient Design: The RP2350-Touch-LCD-2 supports low-power sleep and dormant modes, ensuring energy efficiency in portable devices. It also features a Lithium battery recharge/discharge header, making it suitable for mobile applications. Drag-and-drop programming via mass storage over USB simplifies the development process. Rich WiKi Resources: We provide official Wiki resources, please visit our store and click the wiki page to get resources.
31,99 € SUR AMAZON
Waveshare
Waveshare RP2350 2inch Capacitive Touch Display Development Board,240×320 Pixels, IPS Panel, 262K Color, Onboard Camera Interface
Livraison gratuite
77
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#8
▼ Montrer plus
▲ Montrer moins
Dual-Core Processor Architecture: The RP2350 microcontroller features a unique dual-core design, combining an Arm Cortex-M33 processor and a Hazard3 RISC-V processor. This allows for flexible performance with a clock speed of up to 150 MHz, offering high efficiency and low power consumption for various applications.
Large Memory and Storage: Equipped with 520KB Static RAM and 16MB onboard Flash memory, the RP2350-Touch-LCD-2 offers ample space for program storage and data processing, making it suitable for memory-intensive tasks and complex applications.
Touch Display and Camera Interface: The board features an onboard 2-inch capacitive touch display with a 240 × 320 resolution and 262K colors, ideal for interactive projects. Additionally, it includes a camera interface compatible with popular cameras like the OV2640 and OV5640, allowing for easy image and video capture.
Versatile Connectivity and Expansion: With support for USB 1.1 (device and host), Type-C connectivity, and a variety of I/O options (22 × GPIO pins, 2 × SPI, 2 × I2C, 2 × UART, 2 × ADC channels, 14 × PWM), this board offers extensive expansion possibilities for custom applications and peripheral integration.
Low Power and Efficient Design: The RP2350-Touch-LCD-2 supports low-power sleep and dormant modes, ensuring energy efficiency in portable devices. It also features a Lithium battery recharge/discharge header, making it suitable for mobile applications. Drag-and-drop programming via mass storage over USB simplifies the development process. Rich WiKi Resources: We provide official Wiki resources, please visit our store and click the wiki page to get resources.
24,99 € SUR AMAZON
Waveshare
Waveshare ESP32-S3 2.8inch Capacitive Touch Round Display Development Board, 480x480, 32-Bit LX7 Dual-Core Processor, Supports WiFi & BT, ESP32 with Display
Livraison gratuite
73
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#9
▼ Montrer plus
▲ Montrer moins
ESP32-S3-Touch-LCD-2.8C is a microcontroller development board with 2.4GHz WiFi and BT BLE 5 support, integrates high-capacity Flash and P/Static RAM. Onboard 2.8inch capacitive touch screen can smoothly run GUI programs such as LVGL. Combined with various peripheral interfaces, suitable for the quick development of the HMI and other ESP32-S3 applications
Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Onboard QMI8658 6-axis sensor, RTC sensor, TF card slot and battery recharge management module, etc
Onboard 2.8inch capacitive touch display, 480x480 resolution. Supports 2.4GHz Wi-Fi (802.81 b/g/n) and BT 5 (LE), with onboard antenna
Supports touch control via I2C interface, with interrupt support. Built-in 512KB Static RAM and 384KB ROM, with onboard 16MB Flash and 8MB P/Static RAM
Adapting UART, I2C and some IO interfaces, integrates full-speed USB port. Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios
55,99 € SUR AMAZON
Waveshare
Waveshare ESP32-S3 4inch Capacitive Touch Display Development Board, 480×480, 5-Point Touch, 32-Bit LX7 Dual-Core Processor, Up to 240MHz Frequency, Supports WiFi, with Onboard Antenna
Livraison gratuite
69
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#10
▼ Montrer plus
▲ Montrer moins
Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency
Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT5 (LE), with onboard antenna. Supports capacitive touch control via I2C interface, 5-point touch with interrupt support
Built in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM. Onboard 4inch capacitive touch display, 480×480 resolution, 65K color
Onboard CAN, RS485, I2C interface and TF card slot, and integrates full-speed USB port
Supports flexible clock, module power supply independent setting and other controls to realize low power consumption in different scenarios
46,99 € SUR AMAZON
touch display
touch board
#1 GAGNANT
