Raspberry Pi 5 Poe Nvme
Les 10 meilleurs produits en juin 2025
Dernière mise à jour :
11 juin 2025
GeeekPi
GeeekPi P33 M.2 NVME M-Key PoE+ Hat for Raspberry Pi 5, with Official Raspberry Pi 5 Active Cooler, Support M.2 NVMe SSD 2230 2242 2260 2280
Livraison gratuite
98
QUALITÉ MAXIMALE
VOIR SUR AMAZON
Amazon.fr
#1 GAGNANT
▼ Montrer plus
▲ Montrer moins
【Compatibility】This kit include a P33 M.2 NVME M-Key PoE+ HAT and an official Raspberry Pi Active Cooler, specifically designed for the latest Raspberry Pi 5 model, ensuring optimal performance and compatibility.
【High-Speed NVMe SSD Support】The HAT board supports M.2 NVMe SSDs for lightning-fast data access and storage.
【M.2 Interface】Utilizes the PCIe interface for high-performance communication between the SSD and Raspberry Pi.
【PoE HAT Design】Simplifies power delivery with Power over Ethernet, eliminating the need for additional power cables.
【802.3at PoE Support】Requires a compatible 802.3at PoE switch to provide up to 30W of power, ensuring sufficient power for demanding applications.
【Maximum Power Delivery】Capable of delivering up to 25W at 5.1V/4.5A, suitable for powering both the Raspberry Pi and the NVMe SSD.
39,99 € SUR AMAZON
GeeekPi
GeeekPi P33 M.2 NVME M-Key PoE+ Hat with Official Pi 5 Active Cooler and Aluminum Case for Raspberry Pi 5, Support M.2 NVMe SSDs 2230/2242/2260/2280
Livraison gratuite
96
QUALITÉ SUPÉRIEURE
VOIR SUR AMAZON
Amazon.fr
#2
▼ Montrer plus
▲ Montrer moins
GeeekPi P33 M.2 NVME M-Key PoE+ Hat with Official Pi 5 Active Cooler and Aluminum Case for Raspberry Pi 5, Support M.2 NVMe SSDs 2230/2242/2260/2280
51,99 € SUR AMAZON
Waveshare
Waveshare PCIe to M.2 Hat+ Adapter with PoE for Raspberry Pi 5, with Cooler Fan, Support NVMe Drive Protocol 2230/2242 M.2 Solid State Drive & 802.3af/at Network Standard, High-Speed Reading/Writing
Livraison gratuite
93
QUALITÉ EXCELLENTE
VOIR SUR AMAZON
Amazon.fr
#3
▼ Montrer plus
▲ Montrer moins
PCIe To M.2 with PoE HAT,designed for Raspberry Pi 5, supports IEEE 802.3af/at network standard. Adapter for NVMe Protocol M.2 Solid State Drive, High-speed Reading/Writing.
Improves reading/writing speed of your Pi. Note: Only supports the NVMe Protocol Solid State Drives.
Based on 16PIN PCIe Interface of Raspberry Pi 5. Standard Raspberry Pi 40PIN GPIO stackable header, allows connecting other HATs
Onboard Dual LED Indicators,easy to monitor the Working Status. Compatible With 2230/2242 Size M.2 Solid State Drive. Supports Gen2 and Gen3 Modes, Supports Booting PI5 From Solid State Drive.
Providing both network connection and power supply for your Raspberry Pi in one cable
5V header provides up to 4.5A output (MAX 25W for 12V+5V total output power). be able to power extra devices while providing stable power to Raspberry Pi.
️Rich WiKi Resources️ We provide official Wiki resources, please contact us for more information.
35,99 € SUR AMAZON
GeeekPi
GeeekPi P31 M.2 NVME M-Key PoE+ Chapeau avec refroidisseur actif officiel pour Raspberry Pi 5, prend en charge M.2 NVMe SSD 2230 2242
Livraison gratuite
91
QUALITÉ DISTINGUÉE
VOIR SUR AMAZON
Amazon.fr
#4
▼ Montrer plus
▲ Montrer moins
GeeekPi M.2 NVMe M-Key & POE+ HAT pour Raspberry Pi 5, avec refroidisseur actif officiel Raspberry Pi 5
39,99 € SUR AMAZON
Waveshare
Waveshare PCIe to M.2 Adapter with PoE Function Hat+ (B), Compatible with Raspberry Pi 5, Supports POE NVMe Drive Protocol 2230/2242 / 2260/2280 M.2 Solid State Drive, High-Speed Reading/Writing
Livraison gratuite
87
QUALITÉ FIABLE
VOIR SUR AMAZON
Amazon.fr
#5
▼ Montrer plus
▲ Montrer moins
Based on 16PIN PCIe Interface of Raspberry Pi 5. Standard Raspberry Pi 40PIN GPIO stackable header, allows connecting other HATs
Compatible With 2230 / 2242 / 2260 / 2280 Size M.2 Solid State Drive, Supports Gen2 and Gen3 Modes, Supports Booting PI5 From Solid State Drive
Providing both network connection and power supply for your Raspberry Pi in one cable
5V header provides up to 4.5A output (MAX 25W for 12V+5V total output power), be able to power extra devices while providing stable power to Raspberry Pi
Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.
35,99 € SUR AMAZON
Waveshare
POE M.2 Hat+ (B) Combine PCIe vers M.2 et Power Over Ethernet POE Hat pour Raspberry Pi 5, Supporte NVMe M.2 2230/2242/2260/2280 SSD, IEEE 802.3af/at POE Norme Réseau
Livraison gratuite
81
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#6
▼ Montrer plus
▲ Montrer moins
POE M.2 HAT+(B) is a combination of Power over Ethernet (PoE) and PCIE to M.2 for Raspberry Pi 5, supports IEEE 802.3af/at networking standard, supports M.2 NVMe hard drives in 2230 / 2242 / 2260 / 2280 sizes, supports booting PI5 from Solid State Drive
PCIe to M.2 with PoE HAT (B) only applicable to Raspberry Pi 5, connecting to PI5 via 16PIN PCIe cable. With standard Raspberry Pi 40pin GPIO stackable header, allows connecting other HATs
Supports PCI-E×1 Gen2 or Gen3 mode
Adopts fully isolated Switch Mode Power Supply (SMPS) mode power
Onboard operational indicator lights, the PWR is continuously lit when powered on, and the ACT blinks during read and write operations, making the operational status easily visible
34,55 € SUR AMAZON
Geekworm
Geekworm X1012 PCIe vers M.2 HAT NVMe SSD Shield Support PoE pour Raspberry Pi 5
Livraison gratuite
78
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#7
▼ Montrer plus
▲ Montrer moins
【Compatibilité】Compatible uniquement avec Raspberry Pi 5 SBC (non inclus Raspberry Pi 5), modèle : X1012
Prise en charge PoE : alimentation par Ethernet et compatible avec les spécifications 802.3af/at
【M2 NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 de longueur. Livré avec supports pour installation SSD 2230/2242/2260.
Mode d'emploi : alimentation 35-57 VDC via Ethernet ou 40-57 Vdc via prise d'alimentation auxiliaire
Contenu : 1 bouclier NVMe+POE X1012, 2 câbles PCIe FFC (1 pièce pour la sauvegarde), 1 lot de vis
【Boîtier de correspondance (non inclus) 】 Reportez-vous à P579 (ASIN : B0CRB3DT5M), mais le trou P579 n'est pas réservé pour la prise d'alimentation auxiliaire X1012 CC.
41,00 € SUR AMAZON
Geekworm
Geekworm X1001 PCIe to M.2 NVMe SSD Shield Top for Raspberry Pi 5
Livraison gratuite
75
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#8
▼ Montrer plus
▲ Montrer moins
【Compatibility】Only for Raspberry Pi 5 8GB / 4GB (NOT included)
【Matching Case (NOT included)】P579 (ASIN: B0CRB3DT5M); Or P579 Case with Official Active Cooler (ASIN: B0CT4P893Q)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation.【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1001#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1001 via FFC PCIe ribbon. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC / B0CZCZF2QV)
【Packing List】1 x X1001 Shield, 1x Accessories Pack
16,00 € SUR AMAZON
Waveshare
Waveshare PoE Power Over Ethernet Hat (F) Compatibele with Raspberry Pi 5, High Power, Onboard Cooling Fan, with Metal Heatsink, Supports 802.3af/at Network Standard
Livraison gratuite
74
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#9
▼ Montrer plus
▲ Montrer moins
The PoE HAT (F) is a 802.3af/at-compliant Power Over Ethernet accessory for the Raspberry Pi 5. By using this small HAT and some proper 802.3af/at-compliant power sourcing equipments, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable.
Standard Raspberry Pi 40PIN GPIO header, supports Raspberry Pi 5
PoE (Power Over Ethernet) capability,IEEE 802.3af/at-compliant Fully isolated switched-mode power supply (SMPS)
Onboard high speed active cooling fan, with metal heatsink, better heat dissipation
Provide e-user manual, please check the manual carefully before using!
30,99 € SUR AMAZON
Waveshare
POE M.2 Hat+ Carte d'extension Combinant Power Over Ethernet POE Hat et PCIe vers M.2 Adaptateur pour Raspberry Pi 5, Support IEEE 802.3af/at Norme Réseau et M.2 NVME Disques Durs de 2230/2242
Livraison gratuite
69
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#10
▼ Montrer plus
▲ Montrer moins
PCIe to M.2 with PoE HAT designed for Raspberry Pi 5, supports IEEE 802.3af/at network standard, adapter for NVMe protocol M.2 Solid State Drive, high-speed reading/writing
POE M.2 HAT+ expansion board connecting to PI5 via 16PIN cable, based on 16PIN PCIe interface of Raspberry Pi 5. Standard Raspberry Pi 40PIN GPIO stackable header, allows connecting other HATs
NVMe Drive Slot support, only supports the NVMe Protocol Solid State Drives, compatible with 2230/2242 Size M.2 Solid State Drive, supports Gen2 and Gen3 modes, supports booting PI5 from Solid State Drive
Power Over Ethernet, providing both network connection and power supply for your Raspberry Pi in one cable. Onboard 5V & 12V header outputs, 5V header provides up to 4.5A output (MAX 25W for 12V+5V total output power) be able to power extra devices while providing stable power to Raspberry Pi
Active cooling fan, accelerate cooling effect, more stable performance
34,55 € SUR AMAZON
nvme raspberry pi 5
poe raspberry pi 5
raspberry pi 5 nvme
raspberry pi 5 poe
geeekpi raspberry pi 5 nvme
raspberry pi 5 8go nvme
nvme raspberry pi 5 hailo
raspberry pi 5 nvme shield
raspberry pi 5 16go nvme
raspberry pi 5 nvme hat