Raspberry Pi 5 Ethernet Hat
Les 10 meilleurs produits en juillet 2025
Dernière mise à jour :
27 juillet 2025
ZDE
ZDE ZP593 PCIe to 2.5G Ethernet Network Port PCIe to M.2 Key M NVMe SSD Hat Adapter Expansion Board for Raspberry Pi 5 Support M.2 NVMe 2230 2242 2260 2280 SSD
Livraison gratuite
99
QUALITÉ MAXIMALE
VOIR SUR AMAZON
Amazon.fr
#1 GAGNANT
▼ Montrer plus
▲ Montrer moins
This expansion board adds one 2.5GBE network port and one M.2 Key-M interface for Raspberry Pi 5, which can meet your various needs for those who need to use Raspberry Pi 5 as a Router, Gateway, Firewall, Robot, Smart Home, NAS, VOIP, Industrial Equipment, Telecommunications Equipment and other network devices that need more than one network port.
Through the PCIe interface with PCIe Switch chip to expand into two PCIe interfaces and then through the RTL8125 chip to achieve the expansion of 2.5Gbps Ethernet and M.2 Key-M NVME.
After power on, the board can be automatically recognised as eth1 without installing driver under Raspberry Pi official OS system. When you use OpenWrt, you need to compile the RTL8125 driver into the firmware. When you use ubuntu system, you need to install the driver of RTL8125 and then you can use it.
Support M.2 NVMe SSD for expansion and storage, compatible with M.2 KEY-M NVMe SSD in 2230/2242/2260/2280 length. Support boot from SSD, and it needs Raspberry Pi official firmware, which is at least 2024.5.13.
With four M2.5 fixing holes, the concave design on the top of the board is convenient for the operation and use of 40Pin GPIO.
This adapter board is suitable for use with aluminum case. Only for aluminum enclosure, please refer to ZC506 (ASIN: B0F93SQ67G). For ZP593 PCIe Peripheral Board with ZC506 aluminum case, please refer to ZP545 (ASIN: B0F93SQ52B).
26,99 € SUR AMAZON
Waveshare
Waveshare PoE Hat (G), Compatible with Raspberry Pi 5, 5V 5A Output, Stable Performance, Supports 802.3af/at Network Standard, Power Over Ethernet Hat (G), Suitable for RPi 5 Official Case
Livraison gratuite
97
QUALITÉ SUPÉRIEURE
VOIR SUR AMAZON
Amazon.fr
#2
▼ Montrer plus
▲ Montrer moins
✅Power Over Ethernet HAT For Raspberry Pi 5, Supports IEEE 802.3af/at Network Standard, 5V 5A Output, Compatible With Raspberry Pi 5 Official Case
✅Standard Raspberry Pi 40PIN GPIO header. PoE capability，IEEE 802.3af/at-compliant
✅By using with a PoE router or switch that supports the IEEE 802.3af/at network standard, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable.
✅Onboard original IC solution for more stable PoE power performance
✅Adopts non-isolated switched-mode power supply (SMPS). Compact and easy to assemble
26,99 € SUR AMAZON
Waveshare
Waveshare PoE Power Over Ethernet Hat (F) Compatibele with Raspberry Pi 5, High Power, Onboard Cooling Fan, with Metal Heatsink, Supports 802.3af/at Network Standard
Livraison gratuite
92
QUALITÉ EXCELLENTE
VOIR SUR AMAZON
Amazon.fr
#3
▼ Montrer plus
▲ Montrer moins
The PoE HAT (F) is a 802.3af/at-compliant Power Over Ethernet accessory for the Raspberry Pi 5. By using this small HAT and some proper 802.3af/at-compliant power sourcing equipments, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable.
Standard Raspberry Pi 40PIN GPIO header, supports Raspberry Pi 5
PoE (Power Over Ethernet) capability，IEEE 802.3af/at-compliant Fully isolated switched-mode power supply (SMPS)
Onboard high speed active cooling fan, with metal heatsink, better heat dissipation
Provide e-user manual, please check the manual carefully before using!
30,99 € SUR AMAZON
Waveshare
Waveshare PCIe to Gigabit RJ45 Ethernet Adapter Board (C) for Raspberry Pi 5,Supports Raspberry Pi OS,10/100/1000Mbps Network Standard,Pice x1 GEN2 Mode
Livraison gratuite
90
QUALITÉ DISTINGUÉE
VOIR SUR AMAZON
Amazon.fr
#4
▼ Montrer plus
▲ Montrer moins
PCIe TO Gigabit ETH Board (C) Designed for Raspberry Pi 5
Supports Raspberry Pi OS, Driver-Free, Plug And Play
Connecting To PI5 Via 16PIN Cable,Based On 16PIN PCIe Interface Of Raspberry Pi 5
High-Performance Controller.Onboard Original High-Performance RTL8111H Chip,
Comes With Transparent Acrylic Mounting Plate,Adopts Side-Mounting Solution To Save Space Above The Raspberry Pi 5
16,28 € SUR AMAZON
Waveshare
Waveshare PCIe to MiniPCIe/Gigabit Ethernet/USB 3.2 Gen1 Hat+ Compatible with Raspberry Pi 5, Supports Multiple OS and MiniPCIe Interface 4G Module (Without SIM7600G-H-PCIE),High-Speed Networking
82
QUALITÉ FIABLE
VOIR SUR AMAZON
Amazon.fr
#5
▼ Montrer plus
▲ Montrer moins
This is PCIe TO MiniPCIe GbE USB3.2 HAT+ version: includes the PCIe HAT + accessories This adapter board supports convert the PCIe interface to USB3.2, MiniPCIe and Gigabit ETH, designed for Raspberry Pi 5. It is compatible with multiple MiniPCIe 4G modules or MiniPCIe devices, supports PCI-E×1 Gen2 mode and high-speed communication.
PCIe to MiniPCIe slot, Gigabit Ethernet, and USB 3.2 Gen1 ports.Designed for Raspberry Pi 5, driver-free, plug and play, with HAT+ standard, onboard I2C EEPROM, and support 40pin GPIO header for stacking and expansion.
Onboard MiniPCIe slot, Compatible with SIM7600G-H-PCIE / EG25-G-mPCIe series 4G modules. Note: The 4G module is optional, please refer to the Package Content for detailed part list. The above are the supported modules after testing; If you need to use with other modules, please confirm the interface compatibility of your module.
Onboard PCIe interface for directly connecting to Raspberry Pi 5 via 16PIN cable Onboard 2-ch USB 3.2 Gen1 high-speed interface, for connecting to more peripheral devices, support PCIe to expand USB3.2 MiniPCIe interface, with lower latency.
Onboard power monitoring chip for real-time monitoring of voltage, current and power parameters,supports USB port power control via software Onboard SIM card slot for inserting Nano-SIM card. Onboard reset key, power and network indicator for debugging and checking module working status.
Equipped with RTL8153B high-performance Gigabit ETH chip, sinking design of network port. Supports Raspberry Pi OS / Ubuntu / OpenWRT, etc., stable and reliable network speed
LTE Cat-4: up to 50Mbps (uplink) / up to 150Mbps (downlink); 3G (HSPA+): up to 5.76Mbps (uplink) / up to 42Mbps (downlink); 2G (GPRS/EDGE): up to 236.8Kbps (uplink) / up to 236.8Kbps (downlink).
Supports Global band 4G / 3G / 2G Supports GPS, BeiDou, Glonass, GALILEO, QZSS, LBS base station positioning Note: the 4G module such as SIM7600G-H-PCIE or EG25-G-mPCIe is required to enable this function
Application Scenarios: Industrial Routers, Home Gateways, Set Top Boxes, Industrial Laptops, Consumer Laptops, Industrial PDAs, Rugged Industrial PCs, And Digital Signage...
️Rich WiKi Resources️ We provide official Wiki resources, please contact us for more information.
40,99 € SUR AMAZON
Geekworm
Geekworm X1001 PCIe to M.2 NVMe SSD Shield Top for Raspberry Pi 5
Livraison gratuite
80
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#6
▼ Montrer plus
▲ Montrer moins
【Compatibility】Only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
【Matching Case (NOT included)】P579 (ASIN: B0CRB3DT5M); Or P579 Case with Official Active Cooler (ASIN: B0CT4P893Q)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation.【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1001#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1001 via FFC PCIe ribbon. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC / B0CZCZF2QV)
【Packing List】1 x X1001 Shield, 1x Accessories Pack
16,00 € SUR AMAZON
GeeekPi
GeeekPi P33 M.2 NVME M-Key PoE+ Hat for Raspberry Pi 5, with Official Raspberry Pi 5 Active Cooler, Support M.2 NVMe SSD 2230 2242 2260 2280
Livraison gratuite
79
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#7
▼ Montrer plus
▲ Montrer moins
【Compatibility】This kit include a P33 M.2 NVME M-Key PoE+ HAT and an official Raspberry Pi Active Cooler, specifically designed for the latest Raspberry Pi 5 model, ensuring optimal performance and compatibility.
【High-Speed NVMe SSD Support】The HAT board supports M.2 NVMe SSDs for lightning-fast data access and storage.
【M.2 Interface】Utilizes the PCIe interface for high-performance communication between the SSD and Raspberry Pi.
【PoE HAT Design】Simplifies power delivery with Power over Ethernet, eliminating the need for additional power cables.
【802.3at PoE Support】Requires a compatible 802.3at PoE switch to provide up to 30W of power, ensuring sufficient power for demanding applications.
【Maximum Power Delivery】Capable of delivering up to 25W at 5.1V/4.5A, suitable for powering both the Raspberry Pi and the NVMe SSD.
39,99 € SUR AMAZON
Waveshare
Waveshare Power Over Ethernet Hat (H), Compatible with Raspberry Pi 5 / CM 5, 5V 5A Output, Stable Performance, Supports 802.3af/at Network, Isolated Switched-Mode Power Supply, PoE Hat, Board Only
Livraison gratuite
75
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#8
▼ Montrer plus
▲ Montrer moins
IEEE 802.3af/at Compliance: The PoE HAT (H) is fully compliant with the IEEE 802.3af/at Power over Ethernet (PoE) standards, enabling seamless power and network connectivity through a single Ethernet cable when connected to a compatible PoE router or switch.
Standard GPIO Header: The board is equipped with a standard 40-pin GPIO header, ensuring compatibility with Raspberry Pi 5 and CM 5, allowing easy integration into a variety of projects and applications.
Stable Power Performance: Featuring an onboard original IC solution, the PoE HAT (H) ensures more stable PoE power delivery, providing reliable power supply for the Raspberry Pi even under load.
Isolated Switched-Mode Power Supply (SMPS): The HAT adopts an isolated switched-mode power supply, offering improved efficiency and protection against electrical noise, making it more robust and suitable for industrial and long-term use.
Compact and Easy to Assemble: With its compact design and simple assembly, the PoE HAT (H) is easy to integrate into your Raspberry Pi setup, saving space while offering reliable power and network connectivity in a single unit. Rich WiKi Resources: We provide official Wiki resources, please visit our store and click the wiki page to get resources.
33,99 € SUR AMAZON
Waveshare
Waveshare PCIe to Gigabit Ethernet and USB 3.2 Gen1 Hat, Compatible with Raspberry Pi 5, 3X USB 3.2 Gen1, 1x Gigabit Ethernet, Driver-Free, Plug and Play
70
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#9
▼ Montrer plus
▲ Montrer moins
For reference only, the Raspberry Pi 5 and cooling fan are NOT included, please refer to the Package Content for detailed part list. [Connecting To PI5 Via 16PIN Cable]: Based On 16PIN PCIe Interface Of Raspberry Pi 5
[More USB Capability For Raspberry Pi 5]: Extends The PCIe Interface To 3x High Speed USB 3.2 Gen1 Ports For Connecting More Peripherals
[Extends 1x Gigabit Ethernet Port]: Equipped With RTL8153B High-Performance Gigabit ETH Chip, Sinking Design Of Network Port, Neat And Beautiful
[Network Speed Measurement]: Supports Raspberry Pi OS / Ubuntu / OpenWRT, Etc., Stable And Reliable Network Speed
[Onboard Power Monitoring Chip And EEPROM]: Real-Time Monitoring Of Power Status, Supports USB Port Power Control Via Software
42,99 € SUR AMAZON
Waveshare
POE M.2 Hat+ (B) Combine PCIe vers M.2 et Power Over Ethernet POE Hat pour Raspberry Pi 5, Supporte NVMe M.2 2230/2242/2260/2280 SSD, IEEE 802.3af/at POE Norme Réseau
68
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#10
▼ Montrer plus
▲ Montrer moins
POE M.2 HAT+(B) is a combination of Power over Ethernet (PoE) and PCIE to M.2 for Raspberry Pi 5, supports IEEE 802.3af/at networking standard, supports M.2 NVMe hard drives in 2230 / 2242 / 2260 / 2280 sizes, supports booting PI5 from Solid State Drive
PCIe to M.2 with PoE HAT (B) only applicable to Raspberry Pi 5, connecting to PI5 via 16PIN PCIe cable. With standard Raspberry Pi 40pin GPIO stackable header, allows connecting other HATs
Supports PCI-E×1 Gen2 or Gen3 mode
Adopts fully isolated Switch Mode Power Supply (SMPS) mode power
Onboard operational indicator lights, the PWR is continuously lit when powered on, and the ACT blinks during read and write operations, making the operational status easily visible
34,55 € SUR AMAZON
raspberry pi 5 ethernet
raspberry pi ethernet hat
hat raspberry pi 5
raspberry pi 5 sata hat
sata hat raspberry pi 5
raspberry ethernet hat
raspberry pi 5 m2 hat
raspberry pi 5 ssd hat
ethernet raspberry pi
raspberry 5 hat
#1 GAGNANT
