main logo

Module Drone

Les 10 meilleurs produits en juillet 2025
Dernière mise à jour : 27 juillet 2025
BETAFPV
BETAFPV
BETAFPV ExpressLRS 2.4G OpenTX Mini Nano Récepteur Performances à Longue portée à taux de rafraîchissement élevé pour Drone de Course FPV
Livraison gratuite
star

99

QUALITÉ MAXIMALE

VOIR SUR AMAZON
Amazon.fr
#1 GAGNANT

  • 【ExpressLRS】 ExpressLRS est un lien RC open source pour les applications RC, basé sur le matériel Semtech Lora SX127x ou SX1280 pour RX et TX respectivement. Cela fait d'ExpressLRS l'une des liaisons RC les plus rapides disponibles tout en offrant des performances à longue portée.
  • 【ExpressLRS Receiver】 Le récepteur Nano BETAFPV est basé sur le projet ExpressLRS, un lien RC open source pour les applications RC qui vise à obtenir les meilleures performances de lien possibles en termes de vitesse, de latence et de portée pour le module ELRS TX ou la baie Nano, etc.
  • 【Protocole série Crossfire】 ExpressLRS utilise le protocole série Crossfire (protocole AKA CRSF) pour communiquer entre le récepteur et la carte contrôleur de vol. Assurez-vous donc que votre carte contrôleur de vol prend en charge le protocole série CRSF. La configuration du protocole CRSF peut être consultée à la quatrième page du manuel.
  • 【Taille Nano】Ce récepteur ne pèse que 0,7 gramme et le volume est de 12 mm * 19 mm, ce qui est très approprié pour Tiny whoop en raison de sa taille ultra légère et Nano.
  • 【Configuration & Bind】 Le récepteur Nano peut entrer dans l'état de liaison par mise sous/hors tension trois fois. La méthode de liaison spécifique est accessible. Envoyez-nous simplement un e-mail pour les pages d'assistance.
  • 22,99 € SUR AMAZON
Fyearfly
Fyearfly
GPS Module Apm2.5, Neo-6M-0-001 Module de Contrôle de Localisation de Carte de Signal GPS Haute Sensibilité avec Interface Ipx Antenne Passive Micro USB, pour Voiture, Bateau Et Drone
star

89

QUALITÉ DISTINGUÉE

VOIR SUR AMAZON
Amazon.fr
#4

  • 【Récepteur GPS haute sensibilité】Module récepteur GPS avec batterie de sauvegarde de données XH414. Avec interface micro USB. Le module se caractérise par une sensibilité élevée, une faible consommation d’énergie et une miniaturisation. Sa sensibilité de suivi extrêmement élevée étend considérablement la portée
  • 【Meilleure antenne passive】L’antenne céramique passive et le circuit d’amplificateur d’antenne passif fonctionnent mieux lorsqu’ils sont utilisés seuls. Dans les zones où les récepteurs GPS ordinaires sont incapables de localiser, comme les ciels urbains étroits et les jungles denses, notre module peut réaliser un positionnement très précis.
  • 【Prise en charge du gain du signal】Un petit récepteur GPS augmente le gain du signal MAX2659 et rend le signal de recherche encore plus fort. Grâce à l’interface d’antenne, vous pouvez rapidement trouver une distribution d’antenne active prédéfinie.
  • 【Interface IPX】Avec l’interface IPX, vous pouvez connecter ce module récepteur GPS directement à l’antenne IPX active. Il peut partager des systèmes de suivi mobiles tels que des appareils de voiture portables, la surveillance des véhicules, des téléphones portables, des caméras, des vélos partagés et des alimentations mobiles.
  • 【Mémorisation des données】L’EEPROM stocke les données des paramètres de configuration lorsque l’alimentation électrique est interrompue. Il est fabriqué par des professionnels pour des performances stables. Haute précision, fonctionnement simple et bon contrôle.
  • 13,49 € SUR AMAZON
BETAFPV
BETAFPV
BETAFPV ELRS V3 LiteRadio 3 RC Radio Transmitter with Nano Bay for External TX Module, Support FPV Simulator BETAFPV Configurator V2 Firmware Update Joystick Calibration for FPV Drone Quad - Mode 2
29% Réduction Livraison gratuite
star

85

QUALITÉ FIABLE

VOIR SUR AMAZON
Amazon.fr
#5

  • BETAFPV Configurator Supported: The BETAFPV Configurator V2 is an open-source configuration tool tailored for BETAFPV drones and remote controls that support macOS Linux (Debian family) platforms. It enables pilots to effortlessly configure and fine-tune various parameters, ensuring more efficient and optimized flight control. Please DO NOT power on the transmitter before connecting it to the PC. Doing so will render the USB port non-functional
  • Firmware Update Supported: BETAFPV has released the new firmware for the LiteRadio series remote controller, which brings new features and improvements. Pilots can flash the latest firmware to enjoy the new functions. Please confirm the firmware version first, and refer to the user manual in the package to upgrade the latest firmware if your transmitter has the older firmware version
  • System&Platform Supported: Experience the ultimate flexibility with LiteRadio 3, your gateway to popular FPV simulators like VelociDrone, Liftoff, TRYP, DRL, DCL, DJI, etc. Whether you're on a desktop, Android device, or tablet, LiteRadio 3 ensures smooth compatibility across all platforms. With the added Xbox mode, enjoy effortless integration with the DJI Flight Simulator on the Windows system and elevate your virtual flying experience to new heights
  • Built-in Battery&Charging Module: Equipped with a built-in 2000mAh 1S battery and built-in charging module, you can charge by USB and it can work up to 15 hours without an external module. Meanwhile, it designed a Low-Power warning to indicate a low battery. It indicates a low battery and needs to be re-charged if the blue light flashes slowly and the buzzer beeps continuously
  • External TX Module: LiteRadio 3 features a new design with a nano bay, it supports the external TX module(ELRS/CRSF/TBS protocol only), please note that the external module should support the CRSF protocol when using other brands, if you are ready to install the TBS external nano module, the case size of the nano module should be 64*42*25mm
  • Newly Designed: LiteRadio 3 radio transmitter comes with ergonomic stick ends, the stick is detachable, anti-slip, and adjustable in height, it has long longevity of up to 120k times rotations. The potentiometer is positioning accuracy and fast response sensitivity, bringing a good experience to your flight
  • 54,99 € SUR AMAZON
BETAFPV
BETAFPV
BETAFPV Frsky LiteRadio 3 Remote Control Radio Transmitter with Nano Bay for External TX Module, Support FPV Simulator BETAFPV Configurator V2 Firmware Update Joystick Calibration for FPV Quad-Mode 2
29% Réduction Livraison gratuite
star

81

QUALITÉ BONNE

VOIR SUR AMAZON
Amazon.fr
#6

  • BETAFPV Configurator Supported: The BETAFPV Configurator V2 is an open-source configuration tool tailored for BETAFPV drones and remote controls that support macOS Linux (Debian family) platforms. It enables pilots to effortlessly configure and fine-tune various parameters, ensuring more efficient and optimized flight control. Please DO NOT power on the transmitter before connecting it to the PC. Doing so will render the USB port non-functional
  • Firmware Update Supported: BETAFPV has released the new firmware for the LiteRadio series remote controller, which brings new features and improvements. Pilots can flash the latest firmware to enjoy the new functions. Please confirm the firmware version first, and refer to the user manual in the package to upgrade the latest firmware if your transmitter has the older firmware version
  • Simulator&Platform Supported: Experience the ultimate flexibility with LiteRadio 3, your gateway to popular FPV simulators like VelociDrone, Liftoff, TRYP, DRL, DCL, DJI, etc. Whether you're on a desktop, Android device, or tablet, LiteRadio 3 ensures smooth compatibility across all platforms. With the added Xbox mode, enjoy effortless integration with the DJI Flight Simulator on the Windows system and elevate your virtual flying experience to new heights (Pilots need to Update the Latest Firmware to enjoy the above features)
  • Frsky Protocol: The default protocol of this LiteRadio 3 Radio Transmitter is Frsky FCC D16, it also support 4 different internal protocols which are Frsky D8, Futaba S-FHSS, Frsky FCC D16 and Frsky LBT D16. Pilots can change the protocol easily via radio transmitter. For how to change it, please refer to the user manual. Note: LiteRadio 3 Frsky version only works with D16 ACCST 1.X Frsky protocol. So if you use a Frsky receiver with D16 ACCST 2.X version or ACCESS version, the binding will fail
  • Built-in Battery&Charging Module: Equipped with a built-in 2000mAh 1S battery and built-in charging module, you can charge by USB and it can work up to 15 hours without an external module. Meanwhile, it designed a Low-Power warning to indicate a low battery. It indicates a low battery and needs to be re-charged if the blue light flashes slowly and the buzzer beeps continuously
  • External TX Module: LiteRadio 3 features a new design with a nano bay, it supports the external TX module(ELRS/CRSF/TBS protocol only), please note that the external module should support the CRSF protocol when using other brands, if you are ready to install the TBS external nano module, the case size of the nano module should be 64*42*25mm
  • 54,99 € SUR AMAZON