main logo

Manette Fpv Pc

Les 10 meilleurs produits en juin 2025
Dernière mise à jour : 8 juin 2025
BETAFPV
BETAFPV
BETAFPV Frsky LiteRadio 2 SE Télécommande Radio, Soutenu BETAFPV Configurateur V2, Mise à Jour du Micrologiciel, Simulateur FPV, Chargement USB-C, Calibrage Joystick, pour FPV RC Drone Quad -Mode 2
Livraison gratuite
star

99

QUALITÉ MAXIMALE

VOIR SUR AMAZON
Amazon.fr
#1 GAGNANT

  • BETAFPV Configurator V2 Supported: It is an open-source configurator tool tailored for BETAFPV drones and remote controls. It enables pilots to effortlessly configure and fine-tune various parameters, ensuring more efficient and optimized flight control. Officially released in Dec 2024, supports Windows/macOS/Linux (Debian family) platforms
  • FPV SIM&Platform Support: It has the function of FPV simulator, which can act as a USB Joystick, suitable for FPV starters to play FPV SIM like VelociDrone, Liftoff, TRYP, DRL, DJI etc. Whether you're on a desktop, Android device, or tablet, LiteRadio 2 SE ensures smooth compatibility across all platforms. With the added Xbox mode, enjoy effortless integration with the DJI Flight SIM on Win system and elevate your virtual flying experience to new heights
  • Frsky FCC D16 Protocol: LiteRadio 2 SE transmitter comes with Frsky FCC D16(ACCST1.X) by default. Pilots can easily change Futaba S-FHSS, Frsky D8, Frsky FCC D16, and Frsky LBT D16 mode via the radio transmitter. For how to flash, please refer to product pictures and user manual
  • Built-in Battery&Charging Module: LiteRadio 2 SE radio transmitter remote controller has a built-in 1000mAh 1S battery, which can use up to 8 hours. Comes with a built-in charging module, supports USB charging which is more convenient to use. Meanwhile, it designs a Low-Power warning to indicate a low battery. While it needs to be re-charged (when the voltage is lower than 3.5V), the LED will turn red first, then it will turn blue and flash slowly
  • Note: D16 (FCC & LBT) protocol currently does not support the Frsky receivers with ACCST 2.0 firmware or higher, and it can only bind with ACCST 1.X firmware version XM+ receivers. System Upgrade: Updates with BETAFPV self-developed LiteRadio System. Player can directly operate the Joystick Calibration and Upgrade Firmware on the radio transmitter, which is more convenient for the beginner racer to operate
  • 56,99 € SUR AMAZON
BETAFPV
BETAFPV
BETAFPV ELRS V3 LiteRadio 2 SE Télécommande Radio, Soutien Configurateur V2, Mise à Jour du Micrologiciel, Simulateur FPV, Chargement USB-C, Calibrage Joystick, pour Drone FPV RC Quad -Mode 2
25% Réduction Livraison gratuite
star

97

QUALITÉ SUPÉRIEURE

VOIR SUR AMAZON
Amazon.fr
#2

  • BETAFPV Configurator V2 Supported: It is an open-source configurator tool tailored for BETAFPV drones and remote controls. It enables pilots to effortlessly configure and fine-tune various parameters, ensuring more efficient and optimized flight control. Officially released in Dec 2024, supports Windows/macOS/Linux (Debian family) platforms
  • Firmware Update Supported: BETAFPV has released the new firmware for LiteRadio series remote controller. Pilots can flash LiteRadio 2 SE radio transmitter with firmware version V2024.11.8 or later, a significant upgrade will be unlocked. For How to Update, please refer to user manual
  • FPV SIM&Platform Support: It has the function of FPV simulator, which can act as a USB Joystick, suitable for FPV starters to play FPV SIM like VelociDrone, Liftoff, TRYP, DRL, DJI etc. Whether you're on a desktop, Android device, or tablet, LiteRadio 2 SE ensures smooth compatibility across all platforms. With the added Xbox mode, enjoy effortless integration with the DJI Flight SIM on Win system and elevate your virtual flying experience to new heights(Need to Update the Latest Firmware First)
  • ELRS Firmware Version: LiteRadio 2 SE Transmitter's firmware is ELRS V3, it can't be bound with your equipment with ELRS 2.X version. Please make sure the receiver or the TX module has same ELRS firmware version and then could be bound together. If you don't know the ELRS firmware version, please email us via Amazon
  • Built-in Battery&Charging Module: LiteRadio 2 SE radio transmitter remote controller has a built-in 1000mAh 1S battery, which can use up to 8 hours. Comes with a built-in charging module, supports USB charging which is more convenient to use. Meanwhile, it designs a Low-Power warning to indicate a low battery. While it needs to be re-charged (when the voltage is lower than 3.5V), the LED will turn red first, then it will turn blue and flash slowly
  • 44,99 € SUR AMAZON
BETAFPV
BETAFPV
BETAFPV ELRS V3 LiteRadio 3 RC Radio Transmitter with Nano Bay for External TX Module, Support FPV Simulator BETAFPV Configurator V2 Firmware Update Joystick Calibration for FPV Drone Quad - Mode 2
Livraison gratuite
star

94

QUALITÉ EXCELLENTE

VOIR SUR AMAZON
Amazon.fr
#3

  • BETAFPV Configurator Supported: The BETAFPV Configurator V2 is an open-source configuration tool tailored for BETAFPV drones and remote controls that support macOS Linux (Debian family) platforms. It enables pilots to effortlessly configure and fine-tune various parameters, ensuring more efficient and optimized flight control. Please DO NOT power on the transmitter before connecting it to the PC. Doing so will render the USB port non-functional
  • Firmware Update Supported: BETAFPV has released the new firmware for the LiteRadio series remote controller, which brings new features and improvements. Pilots can flash the latest firmware to enjoy the new functions. Please confirm the firmware version first, and refer to the user manual in the package to upgrade the latest firmware if your transmitter has the older firmware version
  • System&Platform Supported: Experience the ultimate flexibility with LiteRadio 3, your gateway to popular FPV simulators like VelociDrone, Liftoff, TRYP, DRL, DCL, DJI, etc. Whether you're on a desktop, Android device, or tablet, LiteRadio 3 ensures smooth compatibility across all platforms. With the added Xbox mode, enjoy effortless integration with the DJI Flight Simulator on the Windows system and elevate your virtual flying experience to new heights
  • Built-in Battery&Charging Module: Equipped with a built-in 2000mAh 1S battery and built-in charging module, you can charge by USB and it can work up to 15 hours without an external module. Meanwhile, it designed a Low-Power warning to indicate a low battery. It indicates a low battery and needs to be re-charged if the blue light flashes slowly and the buzzer beeps continuously
  • External TX Module: LiteRadio 3 features a new design with a nano bay, it supports the external TX module(ELRS/CRSF/TBS protocol only), please note that the external module should support the CRSF protocol when using other brands, if you are ready to install the TBS external nano module, the case size of the nano module should be 64*42*25mm
  • Newly Designed: LiteRadio 3 radio transmitter comes with ergonomic stick ends, the stick is detachable, anti-slip, and adjustable in height, it has long longevity of up to 120k times rotations. The potentiometer is positioning accuracy and fast response sensitivity, bringing a good experience to your flight
  • 76,99 € SUR AMAZON
BETAFPV
BETAFPV
BETAFPV Matrix 1S G4 3IN1 HD Brushless Flight Controller, Built-in Serial ELRS RX with 5V 3A BEC, 12A ESC, 16MB Blackbox, SH1.0-6Pin Connector for O4 Air Unit for DIY 1S HD Meteor65/75 Pro Whoop
Livraison gratuite
star

80

QUALITÉ BONNE

VOIR SUR AMAZON
Amazon.fr
#6

  • New BEC Stable HD Image Transmission: Digital image transmission requires higher current, and 1S whoops often fly at voltages as low as 3.3V, placing significant demands on the BEC. To meet these challenges, an advanced BEC has been developed, capable of delivering over 3A of current at ultra-low voltages down to 2.85V ensuring stable digital image transmission even in critical situations
  • Enhanced Continuous 12A ESC: HD image transmission adds weight to 1S whoops, demanding stronger power and higher ESC overcurrent capacity. Our engineers exceeded expectations, delivering a robust ESC with 12A continuous output and 18A peak capacity on the iconic "cross" flight controller. This ensures optimal thrust-to-weight ratio, reliable performance, and worry-free high-definition flights
  • Individual Power Supply for IMU: Unlike traditional shared power supply designs, the Matrix 1S 3IN1 HD FC features an independent 3.3V LDO power supply exclusively for the IMU. This innovation eliminates interference, creating a cleaner and more stable environment that enhances flight precision, improves sensitivity, and reduces the risk of performance issues—ensuring unmatched stability during every flight
  • Effortless Setup and Maintenance: The Matrix 1S 3IN1 HD FC is designed to maximize your flight time by minimizing setup hassle. Equipped with convenient motor plugs and a SH1.0-6Pin HD digital port, it allows for a completely solder-free installation and maintenance process. Pilots can focus more on enjoying high-definition flight experiences instead of dealing with complex tools
  • External Device: This Matirx 1S 3IN1 HD Flight Controller not only includes a SH1.0-6Pin connector for DJI O4 Air Unit which is easy to install without soldering, but also reserves 2 complete full-featured serial ports that can be used for external serial receivers, GPS, HD VTX or other serial devices
  • 49,99 € SUR AMAZON
Diswoe
Diswoe
Manette Xbox 360, Manette PC, Manette Filaire pour Xbox 360/ Slim/PC Windoes 7/8/10/XP Joystick Xbox 360 Gamepad USB avec ouble Vibration Design Ergonomique Six Axes
Livraison gratuite
star

80

QUALITÉ BONNE

VOIR SUR AMAZON
Amazon.fr
#7

  • 【Large compatibilité】La manette est entièrement compatible avec XBOX 360 / XBOX 360 slim, ainsi qu'avec le système d'exploitation Microsoft PC Windows 7/8/10/XP. Remarque : Ce manette est fabriqué par une société tierce, et non par Microsoft.
  • 【Plug and Play】 Le manette étend le câble USB jusqu'à 2 mètres, ce qui signifie que vous pouvez avoir plus d'espace libre pour découvrir le jeu. Connectez le câble USB à votre Xbox 360/PC et profitez du jeu sans télécharger ni installer de logiciel.
  • 【Double vibration et prise casque】Moteur à double vibration intégré, les capteurs de pression grondent à chaque mouvement, ressentant chaque bosse et explosion grâce à la double réponse à l'impact des vibrations de la main. Le manette dispose d'une prise casque intégrée de 2,5 mm compatible avec le casque Xbox 360 d'origine, le son haute fidélité permet aux joueurs d'être immergés dans le jeu.
  • 【Excellente expérience de jeu】 Les joueurs peuvent choisir d'ouvrir ou de fermer le port du casque selon leurs préférences personnelles. Le manette comprend deux déclencheurs logiques de point de pression, deux manettes logiques, deux moteurs de retour de vibration et un pavé directionnel en huit. Les touches hautement sensibles et les performances de réponse rapide aident les joueurs à obtenir la meilleure expérience de jeu.
  • 【Design ergonomique】La poignée du manette adopte un design ergonomique. La nouvelle conception des épaules et la conception simplifiée de la poignée s'adaptent mieux aux mains du joueur afin que le joueur ne se sente pas fatigué pendant le long jeu.
  • 24,99 € SUR AMAZON
EasySMX
EasySMX
EasySMX X05 Manettes PC Sans Fil Rechargeable avec RGB/Vibration/Hall Joystick/Hall Trigger, Manette PC Bluetooth pour Gamer/Switch/Mobile/Android/iOS/Android TV Box, 750 mAh, Blanc
Livraison gratuite
star

71

QUALITÉ BONNE

VOIR SUR AMAZON
Amazon.fr
#9

  • 🎮【Éclairage RGB Cool & 7 Couleurs d'Éclairage RGB】EasySMX X05 Manette dispose d'un éclairage sur les joysticks et les poignées, avec 7 couleurs et 2 modes d'éclairage pour créer une atmosphère de jeu unique.
  • 🎮【Compatibilité multiple】EasySMX X05 manette bluetooth sans fil fonctionne avec PC Windows, Switch, Android, IOS, Tablette et Tesla.
  • 🎮【Bluetooth, sans fil 2.4GHz et filaire Mode 3 en 1】EasySMX X05 manette pc sans fil dispose de la technologie sans fil 2.4G via le dongle(PC) et bluetooth(Switch, Android, IOS et Tablette). Pas de fil, pas de tracas. Connectez simplement la manette à votre appareil et jouez. Une fois que vous n'avez plus de batterie mais que vous souhaitez toujours jouer, branchez le câble USB pour connecter le contrôleur et le périphérique de jeu, et passez en mode filaire. Bon jeu!
  • 🎮【Une grande autonomie & Déclencheur à effet hall + Joystick à effet hall】Batterie au lithium 1000 mA intégrée, la durée de vie de la batterie est supérieure à 20 heures. De plus, la configuration à double hall, contrôle plus précis et rejet de la dérive.
  • 🎮【Deux boutons programmables & Conception ergonomique】Quatre boutons programmables au bas de la poignée: M1 M2, opération difficile en un clic, ce qui laissez le joueur jouer instantanément et profitez du plaisir du jeu. Son ergonomie est parfaite, même pour les grandes mains et elle offre toutes les fonctions avancées pour satisfaire les plus exigeants!
  • 30,39 € SUR AMAZON