Hat Poe+
Les 10 meilleurs produits en août 2025
Dernière mise à jour :
7 août 2025
GeeekPi
GeeekPi P33 M.2 NVME M-Key PoE+ Hat for Raspberry Pi 5, with Official Raspberry Pi 5 Active Cooler, Support M.2 NVMe SSD 2230 2242 2260 2280
Livraison gratuite
99
QUALITÉ MAXIMALE
VOIR SUR AMAZON
Amazon.fr
#1 GAGNANT
▼ Montrer plus
▲ Montrer moins
【Compatibility】This kit include a P33 M.2 NVME M-Key PoE+ HAT and an official Raspberry Pi Active Cooler, specifically designed for the latest Raspberry Pi 5 model, ensuring optimal performance and compatibility.
【High-Speed NVMe SSD Support】The HAT board supports M.2 NVMe SSDs for lightning-fast data access and storage.
【M.2 Interface】Utilizes the PCIe interface for high-performance communication between the SSD and Raspberry Pi.
【PoE HAT Design】Simplifies power delivery with Power over Ethernet, eliminating the need for additional power cables.
【802.3at PoE Support】Requires a compatible 802.3at PoE switch to provide up to 30W of power, ensuring sufficient power for demanding applications.
【Maximum Power Delivery】Capable of delivering up to 25W at 5.1V/4.5A, suitable for powering both the Raspberry Pi and the NVMe SSD.
39,99 € SUR AMAZON
GeeekPi
GeeekPi P33 M.2 NVME M-Key PoE+ Hat with Official Pi 5 Active Cooler and Aluminum Case for Raspberry Pi 5, Support M.2 NVMe SSDs 2230/2242/2260/2280
Livraison gratuite
97
QUALITÉ SUPÉRIEURE
VOIR SUR AMAZON
Amazon.fr
#2
▼ Montrer plus
▲ Montrer moins
GeeekPi P33 M.2 NVME M-Key PoE+ Hat with Official Pi 5 Active Cooler and Aluminum Case for Raspberry Pi 5, Support M.2 NVMe SSDs 2230/2242/2260/2280
51,99 € SUR AMAZON
Waveshare
POE M.2 Hat+ (B) Combine PCIe vers M.2 et Power Over Ethernet POE Hat pour Raspberry Pi 5, Supporte NVMe M.2 2230/2242/2260/2280 SSD, IEEE 802.3af/at POE Norme Réseau
94
QUALITÉ EXCELLENTE
VOIR SUR AMAZON
Amazon.fr
#3
▼ Montrer plus
▲ Montrer moins
POE M.2 HAT+(B) is a combination of Power over Ethernet (PoE) and PCIE to M.2 for Raspberry Pi 5, supports IEEE 802.3af/at networking standard, supports M.2 NVMe hard drives in 2230 / 2242 / 2260 / 2280 sizes, supports booting PI5 from Solid State Drive
PCIe to M.2 with PoE HAT (B) only applicable to Raspberry Pi 5, connecting to PI5 via 16PIN PCIe cable. With standard Raspberry Pi 40pin GPIO stackable header, allows connecting other HATs
Supports PCI-E×1 Gen2 or Gen3 mode
Adopts fully isolated Switch Mode Power Supply (SMPS) mode power
Onboard operational indicator lights, the PWR is continuously lit when powered on, and the ACT blinks during read and write operations, making the operational status easily visible
34,55 € SUR AMAZON
Waveshare
Waveshare PCIe to M.2 Hat+ Adapter with PoE for Raspberry Pi 5, with Cooler Fan, Support NVMe Drive Protocol 2230/2242 M.2 Solid State Drive & 802.3af/at Network Standard, High-Speed Reading/Writing
Livraison gratuite
92
QUALITÉ EXCELLENTE
VOIR SUR AMAZON
Amazon.fr
#4
▼ Montrer plus
▲ Montrer moins
PCIe To M.2 with PoE HAT,designed for Raspberry Pi 5, supports IEEE 802.3af/at network standard. Adapter for NVMe Protocol M.2 Solid State Drive, High-speed Reading/Writing.
Improves reading/writing speed of your Pi. Note: Only supports the NVMe Protocol Solid State Drives.
Based on 16PIN PCIe Interface of Raspberry Pi 5. Standard Raspberry Pi 40PIN GPIO stackable header, allows connecting other HATs
Onboard Dual LED Indicators,easy to monitor the Working Status. Compatible With 2230/2242 Size M.2 Solid State Drive. Supports Gen2 and Gen3 Modes, Supports Booting PI5 From Solid State Drive.
Providing both network connection and power supply for your Raspberry Pi in one cable
5V header provides up to 4.5A output (MAX 25W for 12V+5V total output power). be able to power extra devices while providing stable power to Raspberry Pi.
️Rich WiKi Resources️ We provide official Wiki resources, please contact us for more information.
35,99 € SUR AMAZON
Waveshare
Power Over Ethernet PoE Hat pour Raspberry Pi 4B/3B+, 802.3af/at PoE Network, 5V USB-A&12V Header Outputs, PoE Carte D'extension Onboard Cooling Fan et MP8676 Buck Chip
Livraison gratuite
86
QUALITÉ FIABLE
VOIR SUR AMAZON
Amazon.fr
#5
▼ Montrer plus
▲ Montrer moins
【PoE HAT For Raspberry Pi 4B/3B+】Standard Raspberry Pi 40PIN GPIO header, supports Raspberry Pi 3B+/4B, allows Power Over Ethernet HAT connecting other HATs.
【Power Over Ethernet】PoE (Power Over Ethernet) capability, IEEE 802.3af/at-compliant power sourcing equipments, providing both network connection and power supply for your Raspberry Pi in one Ethernet cable.
【PoE HAT Isolated】Fully isolated switched-mode power supply (SMPS)
【5V USB-A & 12V Header Outputs】5V USB-A provides up to 4A output (MAX 25W for 12V+5V total output power), While providing stable power for the Raspberry Pi, there's also a USB-A port for powering extra external device.
【Onboard Cooling Fan and MP8676 Buck Chip】PoE HAT with high speed active cooling fan, better heat dissipation, incorporates MP8676 original voltage buck chip, providing up to 4.5A output for Raspberry Pi and USB-A port.
24,99 € SUR AMAZON
Raspberry Pi
Raspberry Pi® PoE+ Hat 3 B+, 4 B
82
QUALITÉ FIABLE
VOIR SUR AMAZON
Amazon.fr
#6
▼ Montrer plus
▲ Montrer moins
Raspberry Pi PoE+ Hat 3B+, 4B
Contenu : 1 pièce
33,89 € SUR AMAZON
Waveshare
Waveshare PCIe to M.2 Adapter with PoE Function Hat+ (B), Compatible with Raspberry Pi 5, Supports POE NVMe Drive Protocol 2230/2242 / 2260/2280 M.2 Solid State Drive, High-Speed Reading/Writing
Livraison gratuite
81
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#7
▼ Montrer plus
▲ Montrer moins
Based on 16PIN PCIe Interface of Raspberry Pi 5. Standard Raspberry Pi 40PIN GPIO stackable header, allows connecting other HATs
Compatible With 2230 / 2242 / 2260 / 2280 Size M.2 Solid State Drive, Supports Gen2 and Gen3 Modes, Supports Booting PI5 From Solid State Drive
Providing both network connection and power supply for your Raspberry Pi in one cable
5V header provides up to 4.5A output (MAX 25W for 12V+5V total output power), be able to power extra devices while providing stable power to Raspberry Pi
Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.
35,99 € SUR AMAZON
GeeekPi
GeeekPi P31 M.2 NVME M-Key PoE+ Chapeau avec refroidisseur actif officiel pour Raspberry Pi 5, prend en charge les SSD M.2 NVMe 2230/2242
Livraison gratuite
75
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#8
▼ Montrer plus
▲ Montrer moins
Prise en charge SSD NVMe haute vitesse : la carte HAT prend en charge les SSD M.2 NVMe pour un accès et un stockage rapides des données
Interface M.2 : utilise l'interface PCIe pour une communication haute performance entre le SSD et le Raspberry Pi
Compatibilité du facteur de forme SSD 2242 : prend en charge les SSD de 22 mm et 42 mm de largeur, pouvant accueillir une variété de capacités de stockage
Design PoE Hat : simplifie la distribution d'énergie avec Power over Ethernet, éliminant le besoin de câbles d'alimentation supplémentaires. Veuillez noter que ne pas connecter l'alimentation à USB-C sur Raspberry Pi 5 lorsque vous utilisez le chapeau PoE+ comme alimentation, cela pourrait endommager votre appareil. !
Prise en charge PoE 802.3at : nécessite un commutateur PoE 802.3at compatible pour fournir jusqu'à 30 W de puissance, assurant une puissance suffisante pour les applications exigeantes
Puissance maximale : capable de fournir jusqu'à 25 W à 5,1 V/4,5 A, adapté pour alimenter à la fois le Raspberry Pi et le SSD NVMe
38,99 € SUR AMAZON
Raspberry Pi
Raspberry Pi® PoE+ Hat Platine dextension
21% Réduction
70
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#9
Waveshare
Waveshare Power Over Ethernet Hat E Type Support 802.3af PoE Network Standard, Fully Isolated Switched-Mode Power Supply (SMPS), Compatible with Raspberry Pi 3B+/4B
Livraison gratuite
66
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#10
▼ Montrer plus
▲ Montrer moins
Fully isolated switched-mode power supply (SMPS): Enhance device anti-interference ability and security
Suitable for the Raspberry Pi 3B+/4B, it can be used with the official Raspberry Pi case without taking up more space.
PoE (Power Over Ethernet) capability，IEEE 802.3af-compliant. Fully isolated switched-mode power supply (SMPS).
Smaller and more flexible with a more compact component layout. By using this small HAT and some proper 802.3af-compliant power sourcing equipments, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable.
POE Power Input: 37V~57V DC. POE Power Output: 5V/2.5A DC. Network Standard: 802.3af PoE-compliant. Dimensions: 65.00 × 32.00mm.
25,99 € SUR AMAZON
hat poe
poe hat
poe hat pi
poe hat raspberry
raspberry hat poe
raspberry poe hat
waveshare poe hat
poe hat g
poe hat raspberry pi
raspberry pi poe hat
#1 GAGNANT
