main logo

Gpm Xrt

Les 10 meilleurs produits en août 2025
Dernière mise à jour : 13 août 2025
GPM Racing
GPM Racing
GPM Upgrade Parts for 1:5 Traxxas X Maxx 6S 8S & XRT 8S Monster Truck 40Cr Carbon Steel M1.5 Spur Gear 35T + Motor Gear 20T
star

99

QUALITÉ MAXIMALE

VOIR SUR AMAZON
Amazon.fr
#1 GAGNANT

  • Made of 40Cr Carbon Steel, stronger than the original gear, wear-resistance and better transmission. The upgraded 40Cr Carbon steel Spur Gear 35T M1.5 and large gear shaft, bearing and Aluminium 7075 fixed mount bring out three-point support, which is better than the original two-point support in stability and transmission effect.
  • Motor tooth diameter: 8mm, D-shaped motor gear hole, Module: 1.5mm, Number of teeth: 20T, Tooth surface width: 8.5mm, Outer diameter: 33mm.
  • Spur Gear 35T diameter: 6mm, D-shaped motor gear hole, Module: 1.5mm, Number of teeth: 35T, Tooth surface width: 14mm, Outer diameter: 55.4mm.
  • Package includes : Motor Gear 25T-1pc ; 5x5 Screw Shaft-1pc ; Spur Gear 35T M1.5-1pc ; Cush Drive Input Shaft-1pc ; Bearing 6x13x5-1pc ; shim 6x8x3.5-1pc ; shim 6x8x7.5-1pc ; Set Screws 5x5-1pc ; Aluminium 7075 Mount-1pc.
  • Suitable mdoels : Traxxas 1/5 X-Maxx 6S 77076-4, X-Maxx 8S 77086-4, XRT 8S 78086-4.
  • 46,56 € SUR AMAZON
GPM
GPM
GPM Aluminium 7075 Alloy Front + Rear (Upper & Lower) Suspension Arms for Traxxas 1/16 Mini XRT VXL-3S 108076-1 Monster Truck Upgrades - Red
star

97

QUALITÉ SUPÉRIEURE

VOIR SUR AMAZON
Amazon.fr
#2

  • Made of aviation-grade Aluminium alloy 7075-T6, it combines high strength and light weight, and is wear-resistant and impact-resistant.
  • Install the front upper & lower suspension arms, connect it with the arm pin (outer) 37.5mm, install the rear Upper & lower suspension arms, connect it with the arm pin (outer) 34.2mm, and tighten it with the M3 nut to make it more secure.
  • Replaces factory part number #10725, #10740, #10727 suspension arms.
  • Package includes : Front Upper Suspension Arm, Front Suspension screw pins (outside) 37.5mm, 3.0 Lock nut ; Front Lower Suspension Arm, Front Suspension screw pins (outside) 37.5mm, 3.0 Lock nut ; Rear Lower Suspension Arm, Rear Suspension screw pins (outside) 34.2mm, 3.0 Lock nut ; Rear Upper Suspension Arm, Rear Suspension screw pins (outside) 34.2mm, 3.0 Lock nut.
  • Suitable model : Traxxas 1/16 Mini XRT VXL-3S 4WD Brushless Monster Truck-108076-1.
  • 94,44 € SUR AMAZON
GPM
GPM
GPM Aluminium 6061-T6 Alloy Cooling Fan with 35mm Motor Heatsink for Traxxas 1:16 Mini Maxx 4WD 107154-1 / Mini XRT VXL-3S 108076-1 Monster Truck Upgrades - Blue
star

94

QUALITÉ EXCELLENTE

VOIR SUR AMAZON
Amazon.fr
#3

  • The fan cover and heat sink are made of alloy to form a dual heat dissipation structure, which greatly improves the heat dissipation efficiency.
  • Turbo high speed fan 40x40x10mm double ball bearing, voltage 8.4V, current 0.5A, speed 15000 rpm, with adapter.
  • Compatible with the original 36mm motor, easy to install, just plug in the motor.
  • Package includes : Cooling Fan Base-1pc ; Cooling Fan Lid-1pc ; 35mm Heat Sink-1pc ; Cooling Fan-1pc ; Stainless Steel Flat Head Screw 3x16-4pcs ; Plug Adapter-1pc.
  • Suitable models : Traxxas 1/16 Mini Maxx 4WD RTR Brushless Monster Truck 107154-1 ; Mini XRT VXL-3S 4WD Brushless Monster Truck-108076-1.
  • 20,28 € SUR AMAZON
GPM
GPM
Aluminium 6061-T6 Alloy High Speed Cooling Fan 18000 RPM Compatible with 36mm Motor for Traxxas 1:16 Mini Maxx/Mini XRT 3S / 1/8 Jato 2S 4S Upgrade Parts - Orange
star

90

QUALITÉ DISTINGUÉE

VOIR SUR AMAZON
Amazon.fr
#4

  • The fan cover and heat sink are made of alloy to form a dual heat dissipation structure, which greatly improves the heat dissipation efficiency.
  • Turbo high speed fan 40x40x10mm double ball bearing, voltage 8.4V, current 0.5A, speed 18000 rpm, with adapter.
  • Compatible with the original 36mm motor, easy to install, just plug in the motor.
  • Package includes : Cooling Fan Base-2pcs ; Cooling Fan Cover-1pc ; Cooling Fan-1pc ; Plug Adapter-1pc ; Grade 12.9 black Flat Head Screws 3x16-4pcs.
  • Suitable models : Traxxas 1/16 Mini Maxx-107154-1, Mini XRT VXL 3S-108076-1 ; 1/8 Jato 4X4 VXL Brushless-90386-4, Jato 4X4 Brushless-90154-4.
  • 19,08 € SUR AMAZON
GPM
GPM
GPM Aluminium 6061-T6 Alloy Cooling Fan with 35mm Motor Heatsink for Traxxas 1:16 Mini Maxx 4WD 107154-1 / Mini XRT VXL-3S 108076-1 Monster Truck Upgrades - Orange
star

88

QUALITÉ DISTINGUÉE

VOIR SUR AMAZON
Amazon.fr
#5

  • The fan cover and heat sink are made of alloy to form a dual heat dissipation structure, which greatly improves the heat dissipation efficiency.
  • Turbo high speed fan 40x40x10mm double ball bearing, voltage 8.4V, current 0.5A, speed 15000 rpm, with adapter.
  • Compatible with the original 36mm motor, easy to install, just plug in the motor.
  • Package includes : Cooling Fan Base-1pc ; Cooling Fan Lid-1pc ; 35mm Heat Sink-1pc ; Cooling Fan-1pc ; Stainless Steel Flat Head Screw 3x16-4pcs ; Plug Adapter-1pc.
  • Suitable models : Traxxas 1/16 Mini Maxx 4WD RTR Brushless Monster Truck 107154-1 ; Mini XRT VXL-3S 4WD Brushless Monster Truck-108076-1.
  • 20,28 € SUR AMAZON
GPM Racing
GPM Racing
Carbon Steel 4140 Dogbone 190mm for Traxxas 1:5 X Maxx 8S with WideMAXX #7895 / XRT 8S Monster Truck Upgrades - 6Pc Set Black
star

82

QUALITÉ FIABLE

VOIR SUR AMAZON
Amazon.fr
#6

  • Carbon steel thickened and upgraded version of the universal joint dogbone. Diameter is increased from 5.5mm to 7mm for more powerful turn and not easy to deform.
  • The diameter of the pins at the two ends is 4mm. This dogbone is only suitable for Traxxas Xmaxx 8S and convert to widened version.
  • Package includes : Dogbone-2pcs ; 3.5 Thread Steel Collar-2pcs ; 3.5*20 Steel Pin-2pcs.
  • Original stock part number : 7896.
  • Suitable for Traxxas 1/5 X-Maxx 8S with WideMAXX #7895 Kit, XRT 8S Monster Truck 78086-4.
  • 32,17 € SUR AMAZON
GPM Racing
GPM Racing
Medium Carbon Steel Completed Front and Rear Suspension Pins for 1:5 Traxxas X Maxx 6S / X Maxx 8S / XRT 8S Monster Truck Upgrades
star

78

QUALITÉ BONNE

VOIR SUR AMAZON
Amazon.fr
#7

  • Made of medium carbon steel, blackening and hardening treatment. Hexagonal design of the head, more convenient to assemble and disassemble and is not easy to slide.
  • Equipped with a 4.0mm drill bit to ream the hole. Lock nut design to prevent loose pin.
  • Package includes : Front and rear suspension pins-20pcs ; 4.0 Lock nut-20pcs ; Drill bit 4mm-1pc ; Plastic o-rings 4*2-12pcs ; Washers 4*1-4pcs.
  • Original stock part number : 7740, 7741, 7742.
  • Suitable models : Traxxas 1/5 X-Maxx 6S, X-Maxx 8S, XRT 8S-78086-4.
  • 42,54 € SUR AMAZON
PYFORE
PYFORE
GPM pour TRAXXAS 1/6 4WD XRT 8S-78086-4 Tête CVD universelle en acier à haute teneur en carbone avant/arrière
star

74

QUALITÉ BONNE

VOIR SUR AMAZON
Amazon.fr
#8

  • Numéro d'origine : 7768
  • Améliorez le matériau original en aluminium de la tête CVD en acier à haute teneur en carbone, qui est plus solide et résistant à l'usure
  • Modèles compatibles : TRAXXAS 1/6 4WD XRT 8S-78086-4 (dédié)
  • Modèle général pour : TRAXXAS-1/5 X-MAXX 8S MONSTER TRUCK-77086-4
  • 36,94 € SUR AMAZON
GPM
GPM
GPM Aluminium Front Suspension Holder for Traxxas 1:5 X Maxx 6S / X Maxx 8S / XRT 8S Monster Truck Upgrades - Orange
star

70

QUALITÉ BONNE

VOIR SUR AMAZON
Amazon.fr
#9

  • Made from quality light weight high tensile strength Aluminium 6061-T6 for greater strength and durability.
  • Anodized with scratch resistant vibrant alluring colors.
  • Precise measurements for a perfect fit.
  • Easy to install. Direct replacement of the original stock parts.
  • Suitable models : Traxxas 1/5 X-Maxx 6S 77076-4, X-Maxx 8S 77086-4, XRT 8S 78086-4.
  • 37,45 € SUR AMAZON
GPM Racing
GPM Racing
GPM Racing 40Cr Carbon Steel M1.5 Spur Gear 33T + Motor Gear 19T for 1:5 Traxxas X Maxx 6S / X Maxx 8S / XRT 8S Monster Truck Upgrades
star

70

QUALITÉ BONNE

VOIR SUR AMAZON
Amazon.fr
#10

  • Made of 40Cr Carbon Steel, stronger than the original gear, wear-resistance and better transmission. The upgraded 40Cr Carbon steel Spur Gear 33T M1.5 and large gear shaft, bearing and Aluminium 7075 fixed mount bring out three-point support, which is better than the original two-point support in stability and transmission effect.
  • Motor tooth diameter: 8mm, Module: 1.5mm, Number of teeth: 19T.
  • Spur Gear 33T diameter: 6mm, D-shaped motor gear hole, Module: 1.5mm, Number of teeth: 33T, Tooth surface width: 14mm, Outer diameter: 52.4mm.
  • Package includes : Motor gear 19T-1pc ; Screw shaft 5x5-1pc ; Spur gear 33T M1.5-1pc ; Cush drive input shaft-1pc ; Bearing 6x13x5-1pc ; shim 6x8x3.5-1pc ; shim 6x8x7.5-1pc ; Set screws 5x5-1pc ; Aluminium 7075 mount-1pc.
  • Suitable mdoels : Traxxas 1/5 X-Maxx 6S 77076-4, X-Maxx 8S 77086-4, XRT 8S 78086-4.
  • 47,76 € SUR AMAZON
xrt