main logo

Fpv Elrs

Les 10 meilleurs produits en juillet 2025
Dernière mise à jour : 28 juillet 2025
BETAFPV
BETAFPV
BETAFPV ELRS V3 LiteRadio 3 RC Radio Transmitter with Nano Bay for External TX Module, Support FPV Simulator BETAFPV Configurator V2 Firmware Update Joystick Calibration for FPV Drone Quad - Mode 2
29% Réduction Livraison gratuite
star

96

QUALITÉ SUPÉRIEURE

VOIR SUR AMAZON
Amazon.fr
#2

  • BETAFPV Configurator Supported: The BETAFPV Configurator V2 is an open-source configuration tool tailored for BETAFPV drones and remote controls that support macOS Linux (Debian family) platforms. It enables pilots to effortlessly configure and fine-tune various parameters, ensuring more efficient and optimized flight control. Please DO NOT power on the transmitter before connecting it to the PC. Doing so will render the USB port non-functional
  • Firmware Update Supported: BETAFPV has released the new firmware for the LiteRadio series remote controller, which brings new features and improvements. Pilots can flash the latest firmware to enjoy the new functions. Please confirm the firmware version first, and refer to the user manual in the package to upgrade the latest firmware if your transmitter has the older firmware version
  • System&Platform Supported: Experience the ultimate flexibility with LiteRadio 3, your gateway to popular FPV simulators like VelociDrone, Liftoff, TRYP, DRL, DCL, DJI, etc. Whether you're on a desktop, Android device, or tablet, LiteRadio 3 ensures smooth compatibility across all platforms. With the added Xbox mode, enjoy effortless integration with the DJI Flight Simulator on the Windows system and elevate your virtual flying experience to new heights
  • Built-in Battery&Charging Module: Equipped with a built-in 2000mAh 1S battery and built-in charging module, you can charge by USB and it can work up to 15 hours without an external module. Meanwhile, it designed a Low-Power warning to indicate a low battery. It indicates a low battery and needs to be re-charged if the blue light flashes slowly and the buzzer beeps continuously
  • External TX Module: LiteRadio 3 features a new design with a nano bay, it supports the external TX module(ELRS/CRSF/TBS protocol only), please note that the external module should support the CRSF protocol when using other brands, if you are ready to install the TBS external nano module, the case size of the nano module should be 64*42*25mm
  • Newly Designed: LiteRadio 3 radio transmitter comes with ergonomic stick ends, the stick is detachable, anti-slip, and adjustable in height, it has long longevity of up to 120k times rotations. The potentiometer is positioning accuracy and fast response sensitivity, bringing a good experience to your flight
  • 54,99 € SUR AMAZON
BETAFPV
BETAFPV
BETAFPV ELRS V3 LiteRadio 2 SE Télécommande Radio, Soutien Configurateur V2, Mise à Jour du Micrologiciel, Simulateur FPV, Chargement USB-C, Calibrage Joystick, pour Drone FPV RC Quad -Mode 2
25% Réduction Livraison gratuite
star

93

QUALITÉ EXCELLENTE

VOIR SUR AMAZON
Amazon.fr
#3

  • BETAFPV Configurator V2 Supported: It is an open-source configurator tool tailored for BETAFPV drones and remote controls. It enables pilots to effortlessly configure and fine-tune various parameters, ensuring more efficient and optimized flight control. Officially released in Dec 2024, supports Windows/macOS/Linux (Debian family) platforms
  • Firmware Update Supported: BETAFPV has released the new firmware for LiteRadio series remote controller. Pilots can flash LiteRadio 2 SE radio transmitter with firmware version V2024.11.8 or later, a significant upgrade will be unlocked. For How to Update, please refer to user manual
  • FPV SIM&Platform Support: It has the function of FPV simulator, which can act as a USB Joystick, suitable for FPV starters to play FPV SIM like VelociDrone, Liftoff, TRYP, DRL, DJI etc. Whether you're on a desktop, Android device, or tablet, LiteRadio 2 SE ensures smooth compatibility across all platforms. With the added Xbox mode, enjoy effortless integration with the DJI Flight SIM on Win system and elevate your virtual flying experience to new heights(Need to Update the Latest Firmware First)
  • ELRS Firmware Version: LiteRadio 2 SE Transmitter's firmware is ELRS V3, it can't be bound with your equipment with ELRS 2.X version. Please make sure the receiver or the TX module has same ELRS firmware version and then could be bound together. If you don't know the ELRS firmware version, please email us via Amazon
  • Built-in Battery&Charging Module: LiteRadio 2 SE radio transmitter remote controller has a built-in 1000mAh 1S battery, which can use up to 8 hours. Comes with a built-in charging module, supports USB charging which is more convenient to use. Meanwhile, it designs a Low-Power warning to indicate a low battery. While it needs to be re-charged (when the voltage is lower than 3.5V), the LED will turn red first, then it will turn blue and flash slowly
  • 44,99 € SUR AMAZON
BETAFPV
BETAFPV
BETAFPV ExpressLRS 2.4G OpenTX Mini Nano Récepteur Performances à Longue portée à taux de rafraîchissement élevé pour Drone de Course FPV
Livraison gratuite
star

88

QUALITÉ DISTINGUÉE

VOIR SUR AMAZON
Amazon.fr
#4

  • 【ExpressLRS】 ExpressLRS est un lien RC open source pour les applications RC, basé sur le matériel Semtech Lora SX127x ou SX1280 pour RX et TX respectivement. Cela fait d'ExpressLRS l'une des liaisons RC les plus rapides disponibles tout en offrant des performances à longue portée.
  • 【ExpressLRS Receiver】 Le récepteur Nano BETAFPV est basé sur le projet ExpressLRS, un lien RC open source pour les applications RC qui vise à obtenir les meilleures performances de lien possibles en termes de vitesse, de latence et de portée pour le module ELRS TX ou la baie Nano, etc.
  • 【Protocole série Crossfire】 ExpressLRS utilise le protocole série Crossfire (protocole AKA CRSF) pour communiquer entre le récepteur et la carte contrôleur de vol. Assurez-vous donc que votre carte contrôleur de vol prend en charge le protocole série CRSF. La configuration du protocole CRSF peut être consultée à la quatrième page du manuel.
  • 【Taille Nano】Ce récepteur ne pèse que 0,7 gramme et le volume est de 12 mm * 19 mm, ce qui est très approprié pour Tiny whoop en raison de sa taille ultra légère et Nano.
  • 【Configuration & Bind】 Le récepteur Nano peut entrer dans l'état de liaison par mise sous/hors tension trois fois. La méthode de liaison spécifique est accessible. Envoyez-nous simplement un e-mail pour les pages d'assistance.
  • 22,99 € SUR AMAZON
BETAFPV
BETAFPV
BETAFPV SuperD ELRS Diversity Receiver with Dual Receiver Chains 2 Antennas TXCO Tech Support CRSF Protocol for FPV Drone Fixed-Wing Aircraft Long Range Flying Aerial Photography FPV Freestyle Tricks
Livraison gratuite
star

86

QUALITÉ FIABLE

VOIR SUR AMAZON
Amazon.fr
#5

  • 【TXCO Tech】SuperD ELRS 2.4G Diversity Receiver is built-in a TCXO (temperature compensated crystal oscillator), which is shared by two RF chips for a super accurate clock source. The true diversity receiver including two RF chips and PA+LNA will generate a large amount of heat when working. With the high-quality TCXO, it can withstand extreme temperatures with no fear of heat and cold, continuously outputting accurate frequency for long range flight.
  • 【Dual RF Receiver Chains】SuperD ELRS 2.4G Diversity Receiver with two complete RF receiver chains (referring to PA+LNA+SX1280), ensuring longer and more stable flying for FPV drones and RC airplanes. Based on the latest official ExprssLRS. It comes with ExpressLRS V3.0.0 firmware.
  • 【Two Dipole T Antennas】SuperD ELRS 2.4G Diversity Receiver comes with Two Dipole T antennas, it will create an omnidirectional signal for good signal transmission. Placing the antenna separately and vertically as far part as possible to get a better signal is recommended.
  • 【Compatible Products】Not only it is used for FPV drones but also for FPV fixed-wing, or other FPV aircraft. It has superb performance in long range flying. It greatly fulfills the requirements of reliability for long range flying, aerial photography, or FPV freestyle tricks
  • 【Ultralight Weight】 Ultralight weight only 1.1g without the antenna. The receiver board features a reasonable layout and is impeccably clean. Very easy to solder.
  • 28,99 € SUR AMAZON
BETAFPV
BETAFPV
BETAFPV Aquila16 FPV Kit with LiteRadio 2 SE Transmitter for Simulator, VR03 Goggles with DVR Recording Function, 3 Flight Modes, Supported 1S RTF Kit for FPV Beginner to Fly Indoor & Outdoor ELRS V3
Livraison gratuite
star

80

QUALITÉ BONNE

VOIR SUR AMAZON
Amazon.fr
#7

  • 8 Mins Flight: The Aquila16 FPV Kit comes with a default 1100mAh battery, ideal for beginners seeking a smooth flying experience in N/S mode. It offers a flight time of 8 minutes and a maximum flight distance of 200 meters, both indoors and outdoors. Pilots can also use the 650mAh battery, which is exclusive for the Aquila16 in M mode (The 650mAh needs to be ordered separately)
  • Altitude Hold: The Aquila16 drone excels in hover capability for assisted flight, ensuring safe and effortless flight for worry-free learning. Built-in highly precise barometer to detect the height, it benefits from great stability due to its position hold mode, and auto-hovering, which enables the drone to stay at the current height. This function guarantees an emergency landing in situations of lost control or low battery
  • Flight Modes: The Aquila16 Brushless Quadcopter offers N/S/M 3 flight modes and supports 3 different speeds with SLOW/MID/FAST. With Turtle Mode, no burden to fly away, and there is no need to walk away to correct the position manually to flip it over and resume flying when the quadcopter falls to the ground and is upside down. But please note that the position hold function is only available in N mode
  • Camera/Google Signal: The camera will lost the image due to the loose cable and many times of hits, please plug and unplug the cable of the camera if the drone has the issue of lost signal and re-bind the drone with the controller again. Do not power on if you are not taking off, otherwise the camera will be hot
  • LiteRadio 2 SE Transmitter: Aquila16 FPV Kit pack with LiteRadio 2 SE transmitter that comes with the factory default ELRS V3 firmware, which brings a wider operating range. Updates with BETAFPV self-developed LiteRadio System, enabling pilots to conveniently perform Joystick Calibration and Firmware Upgrades directly on the transmitter, enhancing usability and ease of use. Also supports pilots to learn and practice flying a quadcopter through an FPV simulator before real flying
  • Calibration: Please recalibrate the joystick after repeated use if the remote control transmitter is subjected to shocks or the drone tilts sideways. If there is a problem with the propeller and motor, please follow the instructions in the manual to recalibrate the flight controller
  • Package&Note: All components, including the quadcopter, radio transmitter, FPV goggles, and accessories, are conveniently packed in a portable EVA storage bag for easy transportation and enhanced equipment protection. Please verify that all components are included, without damage and with no deformation, all parts are fully charged before flying the kit
  • 312,99 € SUR AMAZON
BETAFPV
BETAFPV
BETAFPV Betaflight ELRS Cetus X FPV Kit with LiteRadio 3 Transmitter, C04 Camera, VR03 Goggles with DVR Recording Function, Supports 2S Power Advanced RTF Kit for Beginners to Fly Faster and Farther
Livraison gratuite
star

65

QUALITÉ BONNE

VOIR SUR AMAZON
Amazon.fr
#10

  • 【Betaflgiht FC Version】This Cetus X FPV Kit comes with the Betaflight Flight Controller, as the advanced ExpressLRS 2S power whoop bundle, which is a completely primary choice to reach a higher stage. Comes with an enhanced propulsion system, VR03 goggles, LiteRadio 3 radio transmitter controller, longer radio and video transmission, pilots can unlock more accomplishments to the next level
  • 【Camera Version】If the camera is broken and need to replace it, please kindly note before buying a replacement camera for the Cetus X Quadcopter, this Cetus X FPV Kit is the version with Betaflight Flight Controller, which only can install the C04 camera with the M04 VTX, and it can't works with the C04 camere with Cetus Cetus FC version, please select the correct one when you order the replacement camera
  • 【Camera Signal】The camera will lost the image due to the loose cable and many times of hits, please plug and unplug the cable of the camera if the drone has the issue of lost signal and re-bind the drone with the controller again
  • 【Firmware & Function】Cetus X FPV Kit comes with the popular firmware in the FPV community. Please make sure the other receivers bind with the controller and have the same firmware version so that they can work together. And this kit also features a function of Betaflight Configurator, which allows pilots to learn how to set up the drone from zero to the next level
  • 【Calibration】Please re-calibrate the joystick after repeated use or the remote control radio transmitter is subjected to physical impact, or the drone occurs a phenome of the the drone fly to one side. If the drone has something wrong with the prop and motor, please follow the manual to re-calibrate the flight controller
  • 【LiteRadio 3 Transmitter】BETAFPV LiteRadio 3 Transmitter features an ergonomically designed handle and has superb performance in its working time lasting up to 15 hours. It also supports BETAFPV Configurator, which is a utility designed to simply update, configure, and tune the radio controller
  • 【VR03 Goggles】BETAFPV VR03 Goggles come with a DVR recording function. Pilots can enjoy the playback saved through the goggles or export the videos by Micro SD card (not included), supporting most Analog VTXs in the market. This exciting function allows pilots to catch the memorably breathtaking moment, greatly heightening the FPV flying experience
  • 347,99 € SUR AMAZON