Elrs
Les 10 meilleurs produits en août 2025
Dernière mise à jour :
9 août 2025
BETAFPV
BETAFPV ELRS 2.4GHz Micro Receiver Support 5 CH PWM Outputs Failsafe Function with IPEX MHF T Antenna Compatible for Multirotors Fixed-Wing Helicopters RC Cars Boats Easy to Install Plug and Play
Livraison gratuite
99
QUALITÉ MAXIMALE
VOIR SUR AMAZON
Amazon.fr
#1 GAGNANT
▼ Montrer plus
▲ Montrer moins
【PWM Output】BETAFPV ELRS Micro receiver is the first ELRS receiver with PWM output on BETAFPV. Supports 5 channels PWM outputs. It also supports flash CRSF output firmware, in this case CH2 corresponds to TX and CH3 corresponds to RX
【Application】ELRS micro receiver adapts for multiple types of models like fixed-wing, helicopters, RC cars, boats and etc.
【Failsafe Function】When the connection or signal is lost between the radio transmitter and receiver, the failsafe function will adjust all the channels to the failsafe values set by the users, maximum keep safety and prevent from flying away. It's necessary to set up failsafe values properly if you are not using a flight controller, such as RC fixed-wing
【Weight&Size】Weighing about 4.5g with an antenna and with the sizes of 19mm*32mm*9mm (without antenna). It means that an FPV drone can not afford to carry.
【Plug &Play】With the plug-and-play connect ports, micro receiver is very easy to use and does not need to solder
16,99 € SUR AMAZON
BETAFPV
BETAFPV ExpressLRS 2.4G OpenTX Mini Nano Récepteur Performances à Longue portée à taux de rafraîchissement élevé pour Drone de Course FPV
Livraison gratuite
96
QUALITÉ SUPÉRIEURE
VOIR SUR AMAZON
Amazon.fr
#2
▼ Montrer plus
▲ Montrer moins
【ExpressLRS】 ExpressLRS est un lien RC open source pour les applications RC, basé sur le matériel Semtech Lora SX127x ou SX1280 pour RX et TX respectivement. Cela fait d'ExpressLRS l'une des liaisons RC les plus rapides disponibles tout en offrant des performances à longue portée.
【ExpressLRS Receiver】 Le récepteur Nano BETAFPV est basé sur le projet ExpressLRS, un lien RC open source pour les applications RC qui vise à obtenir les meilleures performances de lien possibles en termes de vitesse, de latence et de portée pour le module ELRS TX ou la baie Nano, etc.
【Protocole série Crossfire】 ExpressLRS utilise le protocole série Crossfire (protocole AKA CRSF) pour communiquer entre le récepteur et la carte contrôleur de vol. Assurez-vous donc que votre carte contrôleur de vol prend en charge le protocole série CRSF. La configuration du protocole CRSF peut être consultée à la quatrième page du manuel.
【Taille Nano】Ce récepteur ne pèse que 0,7 gramme et le volume est de 12 mm * 19 mm, ce qui est très approprié pour Tiny whoop en raison de sa taille ultra légère et Nano.
【Configuration & Bind】 Le récepteur Nano peut entrer dans l'état de liaison par mise sous/hors tension trois fois. La méthode de liaison spécifique est accessible. Envoyez-nous simplement un e-mail pour les pages d'assistance.
22,99 € SUR AMAZON
BETAFPV
BETAFPV ExpressLRS Lite Receiver with Flat SMD Ceramic Antenna High Refresh Rate Long Range Performance Compatible for 65/75/85mm FPV Racing Whoop Drone V1.2
Livraison gratuite
95
QUALITÉ EXCELLENTE
VOIR SUR AMAZON
Amazon.fr
#3
▼ Montrer plus
▲ Montrer moins
Updated: Building on the open-source ExpressLRS framework – renowned for delivering ultra-low latency, blistering speeds, and exceptional range – the upgraded Lite Receiver flat antenna V1.2 now features an extra-thin 3mm board, an ultra-lightweight 0.46g design, and enlarged soldering pads. Optimised impedance matching elevates signal reliability and sensitivity, enabling 300m range at 25mW transmitter power and up to 1000m at 50mW, pushing the boundaries of long-range potential in micro-sized receivers
Enhanced Signal Reliability & Sensitivity: The flat antenna V1.2’s optimised impedance matching unlocks a transformative leap in signal reliability and sensitivity. Where the original flat antenna V1.1 achieved 500-600m at 50 transmitter power/500Hz, the V1.2 now delivers a robust 1000m under identical conditions, alongside superior signal consistency. This precision-tuned design minimises packet loss during high-speed manoeuvres and enhances low-power efficiency, ensuring crisp responsiveness at 25 (300m range) and unwavering stability at max output
Lightweight Design, Simplified Installation: In response to community feedback, the flat antenna V1.2 now features enlarged soldering pads designed to simplify installation and reduce errors – a critical upgrade for both novices and seasoned builders. Combined with a 13.2% weight reduction (now just 0.46g), the updated design retains its compact footprint while shedding unnecessary mass, freeing up crucial weight budgets for performance-focused builds
Flat Antenna: The Lite Receiver flat antenna V1.2 boasts a 3mm ultra-thin board and 0.46g lightweight design, perfect for space-limited drones. Its low-profile, crash-resistant build offers greater durability than traditional tower antennas. The V1.2’s optimised impedance matching enhances signal reliability and sensitivity, extending its range to 1,000m. This upgrade focuses on refining the flat antenna’s crash resistance, providing pilots with unmatched range and durability in a compact form
Note: Now the firmware version of Lite Receiver flat antenna V1.2 is ELRS 3.3.0; ELRS Innovative team has officially released version 3.3.0. If you want to flash official ELRS firmware, please download the latest ExpressLRS-Configurator or read our manual for flashing it. Significantly, the TX module and receiver have to be in the same ELRS version, otherwise, the frequency cannot match successfully
Configuration & Bind: ExpressLRS uses the Crossfire serial protocol (AKA CRSF protocol) to communicate between the receiver and the flight controller board. So make sure your flight controller board supports the CRSF serial protocol. For more binding details, please refer to manual or the product picture
16,99 € SUR AMAZON
BETAFPV
BETAFPV ELRS V3 LiteRadio 2 SE Télécommande Radio, Soutien Configurateur V2, Mise à Jour du Micrologiciel, Simulateur FPV, Chargement USB-C, Calibrage Joystick, pour Drone FPV RC Quad -Mode 2
25% Réduction
Livraison gratuite
88
QUALITÉ DISTINGUÉE
VOIR SUR AMAZON
Amazon.fr
#4
▼ Montrer plus
▲ Montrer moins
BETAFPV Configurator V2 Supported: It is an open-source configurator tool tailored for BETAFPV drones and remote controls. It enables pilots to effortlessly configure and fine-tune various parameters, ensuring more efficient and optimized flight control. Officially released in Dec 2024, supports Windows/macOS/Linux (Debian family) platforms
Firmware Update Supported: BETAFPV has released the new firmware for LiteRadio series remote controller. Pilots can flash LiteRadio 2 SE radio transmitter with firmware version V2024.11.8 or later, a significant upgrade will be unlocked. For How to Update, please refer to user manual
FPV SIM&Platform Support: It has the function of FPV simulator, which can act as a USB Joystick, suitable for FPV starters to play FPV SIM like VelociDrone, Liftoff, TRYP, DRL, DJI etc. Whether you're on a desktop, Android device, or tablet, LiteRadio 2 SE ensures smooth compatibility across all platforms. With the added Xbox mode, enjoy effortless integration with the DJI Flight SIM on Win system and elevate your virtual flying experience to new heights(Need to Update the Latest Firmware First)
ELRS Firmware Version: LiteRadio 2 SE Transmitter's firmware is ELRS V3, it can't be bound with your equipment with ELRS 2.X version. Please make sure the receiver or the TX module has same ELRS firmware version and then could be bound together. If you don't know the ELRS firmware version, please email us via Amazon
Built-in Battery&Charging Module: LiteRadio 2 SE radio transmitter remote controller has a built-in 1000mAh 1S battery, which can use up to 8 hours. Comes with a built-in charging module, supports USB charging which is more convenient to use. Meanwhile, it designs a Low-Power warning to indicate a low battery. While it needs to be re-charged (when the voltage is lower than 3.5V), the LED will turn red first, then it will turn blue and flash slowly
44,99 € SUR AMAZON
RotorLogic
RadioMaster EdgeTX Télécommande Portable de Poche avec éclairage LED intégré Mode 2 (Anthracite, ELRS)
86
QUALITÉ FIABLE
VOIR SUR AMAZON
Amazon.fr
#5
▼ Montrer plus
▲ Montrer moins
Le RadioMaster Pocket est un excellent choix pour les pilotes qui recherchent une petite radio légère avec toutes les fonctionnalités puissantes auxquelles vous vous attendez.
Disponible en versions ExpressLRS et MPM CC2500/préinstallé avec le firmware EdgeTX
Dispose de cardans à effet Hall en standard pour un galop fluide et une réponse précise
Les lumières LED intégrées aident à visualiser vos entrées d'interrupteur/écran LCD rétroéclairé offrant un équilibre parfait entre taille et fonctionnalité
Dans la boîte : radio de poche, pochette de transport personnalisée, câble USB-C, accessoires, manuel d'utilisation (français non garanti)
150,00 € SUR AMAZON
BETAFPV
BETAFPV ELRS V3 LiteRadio 3 RC Radio Transmitter with Nano Bay for External TX Module, Support FPV Simulator BETAFPV Configurator V2 Firmware Update Joystick Calibration for FPV Drone Quad - Mode 2
29% Réduction
Livraison gratuite
80
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#6
▼ Montrer plus
▲ Montrer moins
BETAFPV Configurator Supported: The BETAFPV Configurator V2 is an open-source configuration tool tailored for BETAFPV drones and remote controls that support macOS Linux (Debian family) platforms. It enables pilots to effortlessly configure and fine-tune various parameters, ensuring more efficient and optimized flight control. Please DO NOT power on the transmitter before connecting it to the PC. Doing so will render the USB port non-functional
Firmware Update Supported: BETAFPV has released the new firmware for the LiteRadio series remote controller, which brings new features and improvements. Pilots can flash the latest firmware to enjoy the new functions. Please confirm the firmware version first, and refer to the user manual in the package to upgrade the latest firmware if your transmitter has the older firmware version
System&Platform Supported: Experience the ultimate flexibility with LiteRadio 3, your gateway to popular FPV simulators like VelociDrone, Liftoff, TRYP, DRL, DCL, DJI, etc. Whether you're on a desktop, Android device, or tablet, LiteRadio 3 ensures smooth compatibility across all platforms. With the added Xbox mode, enjoy effortless integration with the DJI Flight Simulator on the Windows system and elevate your virtual flying experience to new heights
Built-in Battery&Charging Module: Equipped with a built-in 2000mAh 1S battery and built-in charging module, you can charge by USB and it can work up to 15 hours without an external module. Meanwhile, it designed a Low-Power warning to indicate a low battery. It indicates a low battery and needs to be re-charged if the blue light flashes slowly and the buzzer beeps continuously
External TX Module: LiteRadio 3 features a new design with a nano bay, it supports the external TX module(ELRS/CRSF/TBS protocol only), please note that the external module should support the CRSF protocol when using other brands, if you are ready to install the TBS external nano module, the case size of the nano module should be 64*42*25mm
Newly Designed: LiteRadio 3 radio transmitter comes with ergonomic stick ends, the stick is detachable, anti-slip, and adjustable in height, it has long longevity of up to 120k times rotations. The potentiometer is positioning accuracy and fast response sensitivity, bringing a good experience to your flight
54,99 € SUR AMAZON
Wisboey
Wisboey Récepteur FPV ELRS 2,4 GHz Code ouvert Modèle RC Portée Nano 2400RX Réception d'aéronefs à portée fixe
Livraison gratuite
80
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#7
▼ Montrer plus
▲ Montrer moins
Prend en charge la connexion Wi-Fi pour flasher le firmware
Prend en charge la connexion Wi-Fi pour mettre à jour le firmware de manière pratique et
Avec amplificateur de puissance (PA + LNA), avec sortie de télémétrie de 100 mW et meilleure vitesse de réponse
Sortie de télémétrie de 100 mW à haute fréquence de rafraîchissement
Théoriquement compatible avec la plupart des modules de transmission ELRS 2.4G du marché (à condition que la version du firmware soit 2.0 ou supérieure)
17,50 € SUR AMAZON
BETAFPV
BETAFPV SuperD ELRS Diversity Receiver with Dual Receiver Chains 2 Antennas TXCO Tech Support CRSF Protocol for FPV Drone Fixed-Wing Aircraft Long Range Flying Aerial Photography FPV Freestyle Tricks
Livraison gratuite
77
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#8
▼ Montrer plus
▲ Montrer moins
【TXCO Tech】SuperD ELRS 2.4G Diversity Receiver is built-in a TCXO (temperature compensated crystal oscillator), which is shared by two RF chips for a super accurate clock source. The true diversity receiver including two RF chips and PA+LNA will generate a large amount of heat when working. With the high-quality TCXO, it can withstand extreme temperatures with no fear of heat and cold, continuously outputting accurate frequency for long range flight.
【Dual RF Receiver Chains】SuperD ELRS 2.4G Diversity Receiver with two complete RF receiver chains (referring to PA+LNA+SX1280), ensuring longer and more stable flying for FPV drones and RC airplanes. Based on the latest official ExprssLRS. It comes with ExpressLRS V3.0.0 firmware.
【Two Dipole T Antennas】SuperD ELRS 2.4G Diversity Receiver comes with Two Dipole T antennas, it will create an omnidirectional signal for good signal transmission. Placing the antenna separately and vertically as far part as possible to get a better signal is recommended.
【Compatible Products】Not only it is used for FPV drones but also for FPV fixed-wing, or other FPV aircraft. It has superb performance in long range flying. It greatly fulfills the requirements of reliability for long range flying, aerial photography, or FPV freestyle tricks
【Ultralight Weight】 Ultralight weight only 1.1g without the antenna. The receiver board features a reasonable layout and is impeccably clean. Very easy to solder.
28,99 € SUR AMAZON
Boddceto
Boddceto EP1 2400 RX ELRS 2.4GHz RX EXPRESSLRS 2.4G Récepteur pour Drones RC FPV à Longue Portée Quadcopter
73
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#9
▼ Montrer plus
▲ Montrer moins
Type : Récepteur EP1 2400 RX ELRS 2,4 GHz RX EXPRESSLRS 2,4 G
En raison des différents lots, il peut y avoir des différences dans l'apparence du produit, la couleur et le texte imprimé, ce qui n'affectera pas l'utilisation.
14,17 € SUR AMAZON
Hsthe Sea
Hsthe Sea RP3 ExpressLRS 2,4 GHz ELRS Nano Récepteur Récepteur Longue Portée à Faible Latence avec Antenne UFL T pour FPV Micro Drone FPV Racing Drone Quadcopter
Livraison gratuite
65
QUALITÉ BONNE
VOIR SUR AMAZON
Amazon.fr
#10
▼ Montrer plus
▲ Montrer moins
Développée autour du microcontrôleur ESP8285 et de la puce RF SX1280IMLTRT, la série RP offre des liaisons RF Lora et FLRC 2,4 GHz offrant une portée incroyable et une faible latence.
Avec le Wi-Fi intégré, les mises à jour FW peuvent être effectuées sur votre bateau sans qu'il soit nécessaire de retirer le récepteur.
La liaison peut être effectuée à l'aide d'une phrase de liaison, ce qui signifie qu'il n'y a plus de prises de liaison ou d'appuis fastidieux sur les boutons lorsque vous essayez de brancher votre batterie.
PA fournissant jusqu'à 250 mw de performances de télémétrie et de commutation d'antenne pour la diversité d'antenne.
L'emballage comprend : 1 x récepteur nano RP3 ExpressLRS 2,4 GHz, 2 x antennes UFL 2,4 GHz T, 1 x manuel d'utilisation.
29,99 € SUR AMAZON
elrs receiver
récepteur elrs
zorro elrs
elrs rx
rx elrs
#1 GAGNANT
