main logo

E3d Obxidian

Les 10 meilleurs produits en août 2025
Dernière mise à jour : 3 août 2025
E3D
E3D
E3D Fully Assembled High Flow ObXidian™ HotEnd for Bambu Lab P1 Series - 0.4mm
Livraison gratuite
star

98

QUALITÉ MAXIMALE

VOIR SUR AMAZON
Amazon.fr
#1 GAGNANT

  • E3D & Bambu Lab ObXidian High Flow HotEnds are an official collaboration between E3D and Bambu Labs, bringing you one of the most compact, lightweight and, more importantly, performant HotEnds to date.
  • Bambu Lab's P1 series printers are built for speed. However, the motion system has headroom to be even better. Using our patent pending internal nozzle geometry first developed for Revo High Flow, we've managed to increase the volumetric flow rate of the hotend by 60%! That means you can expect more reliable and consistent extrusion at the same speeds or bump up the volumetric flow rate limit in the slicer to utilise the motion systems' capabilities fully.
  • We've applied our E3DLC coating to the nozzle and heater block, adding even more abrasive resistance for all your fibre-filled fun and a non-stick protective layer to prevent plastic build-up on the Nozzle.
  • 139,99 € SUR AMAZON
Creality
Creality
Creality K1 Max 0,4 mm Buse Haut Débit Officielle E3D Obxidian™, Buse en Acier Trempé Multicanal pour Une Impression Haute Vitesse de 600 mm/s pour Imprimantes 3D K1C, Ender 3 V3/Plus, K1 Max K1
Livraison gratuite
star

98

QUALITÉ MAXIMALE

VOIR SUR AMAZON
Amazon.fr
#2

  • Impression Haut Débit - Buse haut débit E3D Obxidian. Dotée d'une chambre de buse élargie atteignant un débit maximal de 42 mm³/s, elle permet une impression à grande vitesse jusqu'à 600 mm/s.
  • Conception Multicanal - Grâce à sa conception innovante, la buse est dotée d'une fonction multicanal permettant le passage d'une plus grande quantité de filament, augmentant ainsi son débit.
  • Matériau Amélioré - Buse Creality E3D adaptée à l'impression d'une grande variété de filaments. Le brise-chaleur est en alliage de titane, ce qui réduit la conduction thermique. La buse est composée d'un alliage de cuivre et d'acier trempé.
  • Conception Intégrée à Remplacement Rapide - La buse K1 Max de 0,4 mm est dotée d'une conception intégrée avec des joints étroitement couplés pour éviter les fuites de matériau, réduire les obstructions et améliorer la stabilité d'impression. Son association avec le brise-chaleur permet un démontage et un remplacement plus rapides et plus pratiques.
  • Largement Applicable - Le kit de buse haut débit est compatible avec les imprimantes 3D K1C, Ender 3 V3, Ender 3 V3 Plus, K1 Max et K1.
  • 48,99 € SUR AMAZON
E3D
E3D
E3D High Flow ObXidian™ HotEnd for Bambu Lab X1/P1 Series - 0.4mm
Livraison gratuite
star

93

QUALITÉ EXCELLENTE

VOIR SUR AMAZON
Amazon.fr
#3

  • E3D & Bambu Lab ObXidian High Flow HotEnds are an official collaboration between E3D and Bambu Labs, bringing you one of the most compact, lightweight and, more importantly, performant HotEnds to date.
  • Using our patent pending internal nozzle geometry first developed for Revo High Flow, we've managed to increase the volumetric flow rate of the hotend by 60%! That means you can expect more reliable and consistent extrusion at the same speeds or bump up the volumetric flow rate limit in the slicer to utilise the motion systems' capabilities fully.
  • E3D has applied their E3DLC coating to the nozzle and heater block, adding even more abrasive resistance for all your fibre-filled fun and a non-stick protective layer to prevent plastic build-up on the Nozzle.
  • Compatibility: The E3D High Flow HotEnd is compatible with the X1, X1 Carbon, X1E, P1S, and P1P
  • 96,12 € SUR AMAZON
E3D
E3D
E3D Prusa ObXidian MK4/XL Nozzle - 1 pcs - 0.4mm
Livraison gratuite
star

89

QUALITÉ DISTINGUÉE

VOIR SUR AMAZON
Amazon.fr
#4

  • >These high-quality 3D printing nozzles are designed specifically for use with Prusas latest extruder – Nextruder. Compatible with Prusas MK4 and XL 3D printers, they feature an all-metal filament guide which means that Nextruders filament path is entirely metal.
  • With a wear resistance that is orders of magnitude higher than any other E3D nozzle, ObXidian is really hard, making it the perfect nozzle for printing abrasive/filled polymers with. This is achieved by pairing a tool steel insert with our new E3DLC coating. This specially formulated coating also embeds non-stick properties into the Nozzle itself.
  • Meaning considerably less plastic build-up around the Nozzle.
  • E3D
  • 59,99 € SUR AMAZON
E3D
E3D
E3D Fully Assembled High Flow ObXidian™ HotEnd for Bambu Lab X1 Series - 0.4mm
star

84

QUALITÉ FIABLE

VOIR SUR AMAZON
Amazon.fr
#5

  • E3D & Bambu Lab ObXidian High Flow HotEnds are an official collaboration between E3D and Bambu Labs, bringing you one of the most compact, lightweight and, more importantly, performant HotEnds to date.
  • Bambu Lab's P1 series printers are built for speed. However, the motion system has headroom to be even better. Using our patent pending internal nozzle geometry first developed for Revo High Flow, we've managed to increase the volumetric flow rate of the hotend by 60%! That means you can expect more reliable and consistent extrusion at the same speeds or bump up the volumetric flow rate limit in the slicer to utilise the motion systems' capabilities fully.
  • We've applied our E3DLC coating to the nozzle and heater block, adding even more abrasive resistance for all your fibre-filled fun and a non-stick protective layer to prevent plastic build-up on the Nozzle.
  • 119,86 € SUR AMAZON
E3D
E3D
E3D RapidChange Revo™ ObXidian Nozzle 0,4 mm    
Livraison gratuite
star

80

QUALITÉ BONNE

VOIR SUR AMAZON
Amazon.fr
#6

  • Remplacez les buses de votre imprimante 3D en moins de 60 secondes sans outils ni compression à chaud, il suffit d’utiliser vos doigts ! Si vous pouvez dévisser un tube de dentifrice, vous pouvez utiliser une buse Revo. Il suffit de visser un côté froid dans n’importe quel Revo et vous êtes prêt pour l’impression 3D.
  • Expérimentez librement: Avec ce simple remplacement de buse, vous pouvez expérimenter avec des tailles de buses que vous n’avez peut-être jamais utilisées auparavant. Ajustez rapidement votre imprimante 3D aux largeurs d’extrusion ultra-minces ou ultra-minces. Imprimez des objets volumineux en moins de temps ou de petits objets avec une haute résolution.
  • Aucune frustration : chaque buse Revo est une buse pré-assemblée et HeatBreak dans une seule unité, il n’y a donc aucun serrage à chaud dangereux et aucun risque d’assemblage incorrect. Dites adieu aux fuites frustrantes et profitez d’une impression 3D fiable !
  • Identification rapide : Identifiez les tailles de buses en un coup d’œil grâce à une chaussette en silicone à code couleur. De plus, chaque buse Revo a sa taille gravée avec des chiffres faciles à lire, il n’y a donc pas de marqueurs d’identification déroutants à apprendre!
  • Une gamme croissante : Nous sommes prêts à produire des buses RapidChange de toutes tailles. Lors du lancement sur le marché, nous introduirons des buses en laiton en 0,25 mm, 0,4 mm, 0,6 mm et 0,8 mm, avec de nombreuses autres buses compatibles à suivre plus tard. Les variantes résistantes à l’usure et à haut débit sont déjà sur notre feuille de route et se poursuivront au fil du temps.
  • 69,99 € SUR AMAZON
E3D
E3D
E3D High Flow ObXidian™ HotEnd for Bambu Lab X1/P1 Series - 0.6mm
star

80

QUALITÉ BONNE

VOIR SUR AMAZON
Amazon.fr
#7

  • E3D & Bambu Lab ObXidian High Flow HotEnds are an official collaboration between E3D and Bambu Labs, bringing you one of the most compact, lightweight and, more importantly, performant HotEnds to date.
  • Using our patent pending internal nozzle geometry first developed for Revo High Flow, we've managed to increase the volumetric flow rate of the hotend by 60%! That means you can expect more reliable and consistent extrusion at the same speeds or bump up the volumetric flow rate limit in the slicer to utilise the motion systems' capabilities fully.
  • E3D has applied their E3DLC coating to the nozzle and heater block, adding even more abrasive resistance for all your fibre-filled fun and a non-stick protective layer to prevent plastic build-up on the Nozzle.
  • Compatibility: The E3D High Flow HotEnd is compatible with the X1, X1 Carbon, X1E, P1S, and P1P
  • 86,78 € SUR AMAZON
E3D
E3D
E3D Fully Assembled High Flow ObXidian™ HotEnd for Bambu Lab X1 Series - 0.6mm
star

76

QUALITÉ BONNE

VOIR SUR AMAZON
Amazon.fr
#8

  • E3D & Bambu Lab ObXidian High Flow HotEnds are an official collaboration between E3D and Bambu Labs, bringing you one of the most compact, lightweight and, more importantly, performant HotEnds to date.
  • Bambu Lab's P1 series printers are built for speed. However, the motion system has headroom to be even better. Using our patent pending internal nozzle geometry first developed for Revo High Flow, we've managed to increase the volumetric flow rate of the hotend by 60%! That means you can expect more reliable and consistent extrusion at the same speeds or bump up the volumetric flow rate limit in the slicer to utilise the motion systems' capabilities fully.
  • We've applied our E3DLC coating to the nozzle and heater block, adding even more abrasive resistance for all your fibre-filled fun and a non-stick protective layer to prevent plastic build-up on the Nozzle.
  • 119,86 € SUR AMAZON
E3D
E3D
E3D RapidChange Revo™ ObXidian High Flow Nozzle - 0.4mm
Livraison gratuite
star

73

QUALITÉ BONNE

VOIR SUR AMAZON
Amazon.fr
#9

  • With a wear resistance that is orders of magnitude higher than any other E3D nozzle, ObXidian is really hard. Several orders of magnitude harder than Nozzle X and indeed any other generic hardened steel nozzle.
  • This is achieved by pairing a tool steel insert with the new E3DLC coating. This specially formulated coating also embeds non-stick properties into the Nozzle itself resulting in considerably less plastic build up around the Nozzle.
  • Revo ObXidian High Flow increases your setup's volumetric flow rate, enabling you to print abrasive materials faster!
  • E3D
  • 80,11 € SUR AMAZON
E3D
E3D
E3D Prusa ObXidian MK4/XL Nozzle - 1 pcs - 0.6mm
Livraison gratuite
star

67

QUALITÉ BONNE

VOIR SUR AMAZON
Amazon.fr
#10

  • >These high-quality 3D printing nozzles are designed specifically for use with Prusas latest extruder – Nextruder. Compatible with Prusas MK4 and XL 3D printers, they feature an all-metal filament guide which means that Nextruders filament path is entirely metal.
  • With a wear resistance that is orders of magnitude higher than any other E3D nozzle, ObXidian is really hard, making it the perfect nozzle for printing abrasive/filled polymers with. This is achieved by pairing a tool steel insert with our new E3DLC coating. This specially formulated coating also embeds non-stick properties into the Nozzle itself.
  • Meaning considerably less plastic build-up around the Nozzle.
  • E3D
  • 59,99 € SUR AMAZON
obxidian e3d high flow obxidian