main logo

E-paper Hat

Les 10 meilleurs produits en septembre 2025
Dernière mise à jour : 12 septembre 2025
Waveshare
Waveshare
Waveshare E-Paper Driver Hat, Compatible with Raspberry/Nucleo Main Control Boards, for Waveshare SPI Interface E-Paper Raw Panels
star

98

QUALITÉ MAXIMALE

VOIR SUR AMAZON
Amazon.fr
#1 GAGNANT

  • Designed for Raspberry Pi 40pin GPIO interface, suitable for Raspberry Pi series motherboard/Jetson Nano
  • Lead out SPI control interface, suitable for Raspberry Pi/Nucleo main control board, etc.
  • Onboard level conversion chip, for 3.3V and 5V microcontroller interface
  • Provide complete supporting information manual (example program for Raspberry Pi/Jetson Nano/STM32)
  • 14,99 € SUR AMAZON
Waveshare
Waveshare
Waveshare Universal e-Paper Driver Hat Supports Various Waveshare SPI E-Paper Raw Panels Compatible with Raspberry Pi and Jetson Nano
Livraison gratuite
star

98

QUALITÉ MAXIMALE

VOIR SUR AMAZON
Amazon.fr
#2

  • This is a universal driver board for e-Paper raw panels, can be used to drive various SPI interface e-Paper from Waveshare
  • Universal e-Paper Driver HAT, supports various Waveshare SPI e-Paper raw panels
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
  • SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • 14,99 € SUR AMAZON
Waveshare
Waveshare
Waveshare Universal e-Eink Driver Hat Supports Various SPI e-Paper Raw Display Panels for Connecting with Raspberry/Arduino/Nucleo
star

93

QUALITÉ EXCELLENTE

VOIR SUR AMAZON
Amazon.fr
#3

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
  • SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc
  • Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32),download link: www.waveshare.com/wiki/e-Paper_Driver_HAT
  • 14,39 € SUR AMAZON
IBest
IBest
Waveshare 2.13inch E-Paper Display Hat V4 Version 250x122 Resolution 3.3V/5V Two-Color e-Ink Display epaper Screen for Raspberry Pi Zero/Zero W/Zero WH/3B/3B+/4B, Partial Refresh, SPI Interface
Livraison gratuite
star

91

QUALITÉ DISTINGUÉE

VOIR SUR AMAZON
Amazon.fr
#4

  • Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+/4B
  • Ultra low power consumption, basically power is only required for refreshing
  • SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.
  • Onboard voltage translator, compatible with 3.3V/5V MCUs,Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • No backlight, keeps displaying last content for a long time even when power down
  • 20,39 € SUR AMAZON
Waveshare
Waveshare
Waveshare 2.13inch E-Paper Display Hat, 250x122 Resolution, Supports Black/White 2-Color, for Raspberry Pi Zero/Zero W/Zero WH for pwnagotchi Project
Livraison gratuite
star

86

QUALITÉ FIABLE

VOIR SUR AMAZON
Amazon.fr
#5

  • This is an V4(the latest version) E-Ink display HAT for Raspberry Pi, 2.13inch, 250x122 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.
  • Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing.
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. SPI interface, for connecting with other controller boards like/Nucleo, etc. Onboard voltage translator, for 3.3V/5V MCUs.
  • Provide with development resources and manual (examples for Raspberry Pi/Jetson Nano/STM32). Please contact our 24-hour customer service for relevant resources and manuals.
  • 20,59 € SUR AMAZON
Waveshare
Waveshare
Waveshare 7.5 inch E-Paper Display Hat V2 for Home Assistant & ESPHome Projects 800x480 3.3v/5v E-Ink Electronic Screen with Embedded Controller SPI Interface for Raspberry Pi/Jetson Nano/STM32
Livraison gratuite
star

81

QUALITÉ BONNE

VOIR SUR AMAZON
Amazon.fr
#6

  • This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 800×480 resolution, with embedded controller, communicating via SPI interface. Note:Version 2 please use corresponding demo code
  • Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • No backlight, keeps displaying last content for a long time even when power down.Ultra low power consumption, basically power is only required for refreshing
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.
  • Onboard voltage translator, compatible with 3.3V/5V MCUs.Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32). Compatible with Raspberry Pi 2B/3B/3B+/Zero/Zero W,Jetson Nano;SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.
  • 69,99 € SUR AMAZON
Waveshare
Waveshare
Waveshare 2.13 inch e-Paper Display Hat V4 250x122 Resolution E-Ink Screen Electronic Paper Module with Embedded Controller SPI Interface for Raspberry Pi Zero/Zero W/Zero WH for pwnagotchi Project
Livraison gratuite
star

78

QUALITÉ BONNE

VOIR SUR AMAZON
Amazon.fr
#7

  • Il s'agit d'un écran E-Ink Hat pour Raspberry Pi, 5,4 cm, 250 x 122 résolution, avec un contrôleur intégré, communique via interface SPI, prend en charge la régénération partielle.
  • Pas de rétroéclairage, maintient d'afficher du contenu dernière pendant une longue période, même lorsque l'alimentation vers le bas
  • Ultra faible consommation d'énergie, alimentation est nécessaire uniquement pour la rafraîchissante.
  • Compatible avec Raspberry Pi 2B/3B/zéro/zéro W, livré avec des ressources de développement et le manuel (exemples pour Raspberry Pi Arduino/stm32). Veuillez contacter notre service à la clientèle 24h / 24 pour obtenir les ressources et manuels pertinents.
  • préservé solder pads pour interface SPI, le contrôleur pour le raccordement avec d'autres Conseils tels que Arduino/nucleo, etc.
  • 20,59 € SUR AMAZON
Waveshare
Waveshare
Waveshare 2.7 inch E-Paper Display Hat Module Kit 264x176 Resolution 3.3v/5v E-Ink Electronic Paper Screen with Embedded Controller for Raspberry Pi/Jetson Nano/Arduino/STM32 with SPI Interface
Livraison gratuite
star

76

QUALITÉ BONNE

VOIR SUR AMAZON
Amazon.fr
#8

  • This is an E-Ink display HAT for Raspberry Pi, 2.7inch, 264x176 resolution, with embedded controller, communicating via SPI interface.
  • Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • No backlight, keeps displaying last content for a long time even when power down.Onboard 4x Keys
  • Ultra low power consumption, basically power is only required for refreshing.Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano。Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • 24,99 € SUR AMAZON
SEENGREAT
SEENGREAT
Carte mère universelle E-Paper Display Driver HAT Board pour Raspberry Pi Series, compatible avec Arduino, STM32, ESP32 - Interface SPI avec code open source
Livraison gratuite
star

73

QUALITÉ BONNE

VOIR SUR AMAZON
Amazon.fr
#9

  • Large compatibilité : conçu pour les plates-formes Raspberry Pi, Arduino, STM32 et ESP32, cette carte de pilote à encre électronique universelle se connecte facilement via une interface GPIO ou SPI 40 broches pour de nombreuses applications e-paper.
  • Interface SPI efficace : caractéristiques de l'interface SPI avec des exigences minimales de broches, ce qui rend ce pilote de papier électronique idéal pour les projets qui demandent des ressources E/S sans sacrifier les performances.
  • Compatibilité 3,3 V/5 V : équipée d'une puce de transfert de niveau embarquée, cette carte pilote est compatible avec les deux microcontrôleurs 3,3 V et 5 V, offrant une intégration flexible pour les systèmes Raspberry Pi, Arduino et STM32.
  • LED et boutons intégrés : livré avec deux LED embarquées et deux boutons pour une personnalisation supplémentaire, ce qui le rend parfait pour les amateurs de bricolage et les développeurs qui travaillent sur des projets d'affichage interactifs.
  • Support de code open source : comprend le code C et Python open-source pour Raspberry Pi, ainsi que le code d'échantillon pour Arduino, STM32, et ESP32, permettant aux utilisateurs d'afficher facilement du texte, des graphiques et des formes sur une variété d'écrans à encre électronique.
  • 15,65 € SUR AMAZON
Waveshare
Waveshare
Waveshare 2.15inch e-Paper Hat+ (G), Compatible with Raspberry Pi 5/4B/3B/Zero/Zero W/Zero 2W/Pico/Pico W/Pico WH, 296x160, Red/Yellow/Black/White, SPI Interface E-Ink Display with Driver Board
Livraison gratuite
star

69

QUALITÉ BONNE

VOIR SUR AMAZON
Amazon.fr
#10

  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano, RDK X3 Adopts Raspberry Pi HAT+ standard to improve interoperability, helping the users to design and develop faster, easy to use with other peripherals and extend more functions for Raspberry Pi
  • Adapting SPI interface for connecting with controller boards like Raspberry Pi / Arduino / STM32, etc. Onboard voltage translator, compatible with 3.3V / 5V MCUs
  • Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.
  • 25,99 € SUR AMAZON
e paper e-paper ecran e paper ecran e-paper e paper color e paper tablette e-paper tablette tablette e paper tablette e-paper e-paper display